Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Blanket chest
-
25th February 2013, 10:07 PM #1GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
Blanket chest
Have just finished a blanket chest for SWMBO. Was not too happy about it having to be finished in white paint to match the bedroom suite. In fact it is the worst part of the project. Whilst I have a small spray gun, I do not have any place to use it. Even with a very good paint brush and lots of care the finish is not one that I am satisfied with. Despite all this the client is happy. Because it was going to be painted I settled on kauri pine and maple for the bulk of the construction. There is some jarrah and myrtle in there also. Because it was to be painted I made the most of what timber I had. Behind each leg there is a block to support a slide so that it can esily be moved over the carpet.
GEDC0468.JPGGEDC0469.JPGBob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
25th February 2013 10:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th February 2013, 08:44 AM #2
Great Job.
Can just imagine in 100 years time when it's bought at auction and someone strips it back.
What a fine they will have.
Cheers
Steve
-
26th February 2013, 09:36 AM #3
Looks a good job.
-
26th February 2013, 10:46 AM #4
Nice job! I like the idea of drawers in it.
-
26th February 2013, 02:22 PM #5
I'll let you off this time. Don't ever paint wood again!!!!
Visit my website at www.myFineWoodWork.com
-
26th February 2013, 02:54 PM #6GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
You can count on it Scott.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
27th February 2013, 09:55 AM #7Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Nice job and I sympathise with you on the paint finish!!
-
18th February 2015, 12:07 PM #8Senior Member
- Join Date
- Jan 2015
- Location
- Sunshine Coast
- Posts
- 215
Hi Bob,
Sorry to resurrect an old thread but you used the Rockler Torsion Support Hinges which I am looking at using so I would like to ask you a question about them. I contacted Rockler and they have been very helpful but it seems they always endup answering only part of my questions leaving me with more questions as a result.
I'm looking at using the Rockler hinges, the same style as you used in this blanket chest. I'm trying to find out if the hinge makes it easier to open the lid i.e. assists the opening, or does it resist opening as well as counteracting gravity to keep the lid in any position you leave it in (similar to a laptop lid).
I understand that when selected using their online calculator, the hinge will support the weight of the lid so it will not slam shut. Great. The lid of the box I am building is going to be a bit on the heavy side (about 6 to 7 kg) which means it isn't a simple lift to open it. It will require both hands. I'd like to make it easier so it can be opened with one hand. With a regular symmetric torsion hinge, the retarding force holding the lid open is the same as the force in the opposite direction which makes it harder to open the lid as well; similar to how a laptop lid/screen works. In other words, by making the lid not slam shut, it also makes it harder to open. So, opening a 6kg lid will feel like a 12kg lid. I asked Rockler if the Rockler hinge acted like a normal torsion hinge or if I needed to add a gas strut or something similar in order to make the force/effort needed to open the lid easier. The response from them said that if I add a gas strut, I wouldn't be able to close the lid at all! This would make me think that the Rockler hinge acts more like a Torsion Hinge with some sort of spring assist thereby making it easier to open the lid as well as holding it in any position. Since you have used these hinges, what did you find? Did they simply resist both opening and closing or did they resist closing but aid opening?
-
18th February 2015, 01:26 PM #9SENIOR MEMBER
- Join Date
- Nov 2010
- Location
- Perth W.A
- Posts
- 720
Nice work, Bob
Certainly agree about the white paint but suppose we have to do as we are told.
Your chest with the drawers in the base would be referred to as a "mule chest"
I have spray equipment too but also have no proper place to use it except outside and its hardly ideal.
-
18th February 2015, 02:32 PM #10GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
Hi TT. My lid is 1113 x 480 with a timber frame and MDF insert. Can't remember the weight I used in my calculations, but it was not light. The Rockler calculator suggested three hinges - 2 x 40inlb(43998) and 2 x 60inlb (44283). This turned out to work well. Not too hard to lift, closes easily. I can lift mine with one hand with little effort. Holds in any position with no indication of closing. Given the calculator makes suggestions based on size and weight of lid I suspect that Rockler may be right is saying that extra effort may be required to shut the lid. There would be a force to overcome that has not been taken into account. SWMBO has no problem operating the lid, and she is the one that uses it all the time. Would I use them again; most definitely! Just a shame about the cost and freight.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
18th February 2015, 02:44 PM #11Senior Member
- Join Date
- Jan 2015
- Location
- Sunshine Coast
- Posts
- 215
Hi Bob,
Thanks for that. It sounds like yours is about the same idea as mine. I'm using 50x50 pine for the frame with 19mm Ply for the panel in the top. The Rockler calculator told me I would need 1 x 40 and 2 x 60 hinges. It calculates it at 17.7 Nm (157 inlbs). The box I'm making is a toy chest so it will be little ones opening it hence the need to make it easy to open.
The price of their hinges is quite steep, including the shipping. Hinges for 2 toy boxes and shipping is going to run about $200 . Therefore, I really need to be sure these are the right solution before hitting the purchase button. Thanks
TTLast edited by TongueTied; 18th February 2015 at 02:48 PM. Reason: Forgot to add something...like always
Similar Threads
-
Chest blanket box WIP
By Claw Hama in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 76Last Post: 18th July 2011, 07:14 AM -
Blanket chest - WIP
By Rocker in forum WOODWORK PICSReplies: 22Last Post: 2nd October 2006, 11:06 AM -
WO blanket chest
By KenSmith in forum WOODWORK PICSReplies: 14Last Post: 13th November 2005, 07:20 PM -
Blanket chest.
By ryanarcher in forum WOODWORK PICSReplies: 25Last Post: 2nd June 2005, 08:35 AM -
Blanket chest
By KenSmith in forum WOODWORK PICSReplies: 12Last Post: 27th January 2005, 08:16 AM