Results 1 to 14 of 14
Thread: Fiddling all the way to the end
-
26th July 2023, 03:05 AM #1
Fiddling all the way to the end
Time to put this build to bed ... or at least next to a bed.
The Jarrah bases are complete with two coats of hard wax oil ...
The plan is to bolt each drawer case to its base. The reason for this is it will make it possible to transport the nightstands more easily should this be in the future (there is a possibility I may enter them in the furniture competition put on by my club, which takes place in about 6 weeks - I doubt that anyone would take nightstands seriously). Transferring the holes to the case ...
Inserts are sunk into the case for the M6 bolts ...
... and bolted down ...
Time to make drawer pulls. My wife suggested going without anything to retain the clean lines. That would have been nice, just not possible. So the next best idea was to try and make the pulls blend in and be as unobtrusive as possible.
The Tasmanian Oak drawers receive a similar pull. Here the plan is drawn out ...
The underside of the pull receives a "dimple" for grip ...
Before cutting out the shape of the bandsaw and shaping with rasps and files, the tenons are pared away ...
Here the tiny drawer is being morticed for its tiny pull ...
This is repeated with the larger drawer ...
Before the pulls can be fitted, they each need to coped to match the curve of the drawer. But finally ...
Note that the pulls are the same diameter as the top of the legs.
The pull on the tiny drawer is a tinier version ...
Inside the drawer, I finalised the mechanism. This doubles as a guide and a drawer stop.
Closed ...
Open ...
The back can now be closed up. Each has a book-matched panel (mainly because I had run out of wood scraps), and is screwed down at the ends. Movement across the grain is permitted by the outer screw holes being elongated.
And, last but not least, two completed nightstands ...
I hope that you have enjoyed the journey with me.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
26th July 2023 03:05 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th July 2023, 03:47 PM #2
Great work Derek. Very nice.
Hey where did you get that brilliant circle gauge?
-
29th July 2023, 03:51 PM #3
Thanks Kev.
I purchased this compass a year or so ago, and this is one of the few occasions I have had to use it. Made by Makers Cabinet, and called the Iris. I think it is something out of Stargate
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
29th July 2023, 05:11 PM #4
The large drawer front looks curved in some pic's but flat on other, is it the lens making it look curved?
EDIT: Sorry now read your notes with the pic's and see they are curved, it gives the box shape a bit more interest
-
29th July 2023, 05:21 PM #5
Wonderful work as ever Derek. I hope you do enter them in your local show; perhaps some people may not get overly excited about nightstands but the design elements and joinery are worthy of any piece of furniture.
ps please ignore my “wants pictures”; finger failure struck again….Nothing succeeds like a budgie without a beak.
-
30th July 2023, 12:49 AM #6
Thanks for the confidence boost, CT.
The irony is that it requires a lot of work to make a design took simple, and there are a fair number of reasonably advanced techniques here as well. But this does not auger well for competitions, where the judges want flash.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
30th July 2023, 09:00 PM #7SENIOR MEMBER
- Join Date
- Aug 2020
- Location
- Sunshine Coast
- Posts
- 826
Stuff the uppity shows, taste is far too subjective. The only votes that have meaning are backed up with a credit card. There's a high-end gallery that sells this type of furniture in Bungendore. You probably already know of it. I think you'd get some success in places like that. Then you can buy your own meaningless blue ribbon with the profits...
Hell of a good job.
-
30th July 2023, 11:33 PM #8
The idea of making furniture to submit to galleries is common fantasy among amateur woodworkers, such as myself .... one day, when I retire, I'll build furniture and it will pay for itself ... an income in my retirement.
It's possible, but much more likely I shall continue building furniture for the family, without deadlines and at my own pace.
Meanwhile, I have no pretensions about what wins competitions. I have won a few (a surprise). Also came second a number of times - the judges have a recipe (generally veneer plus), which is not something I do. I enter if there is a new piece constructed at the time, and never build for a competition. But one can dream ...
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
31st July 2023, 11:06 AM #9... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,099
-
7th August 2023, 10:52 PM #10regards from Alberta, Canada
ian
-
7th August 2023, 11:44 PM #11
Hi Ian
There was a reason for those washers, which I did not mention. The washers are self-centring. This allows for a larger bolt hole about which the bolt can move a little extra in all directions. However, they were not chosen for the purpose of wood movement. They were chosen to make it easier to ensure that the hole and threaded insert line up.
I do not expect an issue with movement since wood moves across the grain, and the case and the risers are both built with grain running together.
Regards from Perth
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
5th June 2024, 12:05 AM #12
Stunning work mate, good to see you're keeping busy!
Sent from my Pixel 8 Pro using Tapatalk
-
5th June 2024, 12:38 AM #13
Thanks Dan.
The latest edition of the Australian Wood Review magazine has an article about this build.
Cheers
DerekVisit www.inthewoodshop.com for tutorials on constructing handtools, handtool reviews, and my trials and tribulations with furniture builds.
-
5th June 2024, 01:10 AM #14
Oh nice, I'll go have a read!
Sent from my Pixel 8 Pro using Tapatalk
Similar Threads
-
fiddling with finials again.
By tea lady in forum WOODTURNING - GENERALReplies: 13Last Post: 16th May 2012, 07:25 PM