Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Laundry closet fit out
-
11th October 2012, 10:09 PM #1
Laundry closet fit out
The brief was to fit out a very long (3.8m) but narrow (300mm) laundry closet with a mix of fixed and adjustable shelves, a small storage nook and hanging space. First I relined the closet with 4mm hoop pine plywood. I chose 19mm radiata pine boards and 30mm laminated radiata panel which I ripped down for the upper shelf. The unit was assembled in two halves so it could be pushed down into the small returns at each end of the closet. Once the two halves dropped into place they were stitched together with two zip bolts in the large shelf and a screwed and biscuited bottom centre shelf. Rubber feet keep it free of any water spills and permit levelling. The boards were all prefinished with a good quality water based polyurethane. Of course I forgot to photograph the install until after refitting the four sliding doors.
-
11th October 2012 10:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th October 2012, 08:14 AM #2GOLD MEMBER
- Join Date
- Aug 2012
- Location
- Imbil
- Posts
- 1,167
Look's great you will have a lot of storage there great use of space.
Regards Rod.
-
15th October 2012, 07:45 AM #3
Simple design are offen the best. This is very much the case on your work. Excellent.
Similar Threads
-
Out of the closet!!!
By shazzkim in forum WOODTURNING - PEN TURNINGReplies: 9Last Post: 20th October 2009, 08:49 AM -
closet
By dlpfan40 in forum WOODWORK PICSReplies: 1Last Post: 11th May 2008, 03:44 PM -
Closet woodie
By forunna in forum WOODWORK - GENERALReplies: 9Last Post: 20th July 2004, 09:42 PM