Needs Pictures: 0
Results 1 to 6 of 6
Thread: Mid century modern bedside table
-
29th June 2023, 08:25 PM #1Intermediate Member
- Join Date
- May 2020
- Location
- Brisvegas
- Posts
- 30
Mid century modern bedside table
Wanted to make a post about the first "nice" piece of proper furniture I've ever made. I made plenty of mistakes along the way and learned a lot, but I'd love to hear any tips for my next piece.
After demolishing a shade awning that stood next to my house, I salvaged from the ruins a few lengths of fairly nice brushbox(?). The paint did not contain lead, and the timber was most likely untreated, so I thought it would make for nice project wood. And so it sat under my house for a few months while I schemed...
Using Shapr3D on my iPad I came up with a design for a mid-century modern inspired bedside table. I wanted something with an open shelf for storing said iPad, mitred corners, and a cool leg design. The overall style was strongly inspired by this set of bedside tables made by Keith of the Rag'n'bone YouTube channel.
IMG_0041.jpgIMG_0009.jpg
From there I started turning the painted timber into pieces suitable for panel glue-ups. I removed the paint with a power hand planer, and milled it all to size on my planer thicknesser combo.
IMG_5866.jpgIMG_5868.jpgIMG_6082.jpg
This was my first time gluing up panels of this size, so I had a few false starts. One panel had the individual boards cup significantly after glue up, which necessitated ripping it back down and gluing up again. Luckily I'd left the panel big enough! Not pictured here is me painstakingly filling all the bug holes, cracks and defects with black epoxy, which took way too long and was not fun at all.
IMG_6084.jpgIMG_6091.jpeg
I sorted through the panels and figured out which would go where, with the prettiest panel on the top face and the ugliest sides inside where they wouldn't be seen. I cut the boards to size, checked my mitres (needed a second pass to get them perfect), cut slots for the shelf, then glued up the carcass. This was extremely nerve wracking! and despite a practice run I still managed to get the thing slightly out of square.
IMG_6137.jpeg
Fortunately I was able to pull it back into square when I attached the back panel. This thing was actually starting to come together!
IMG_6138.jpgIMG_6145.jpeg
I quickly threw together some drawer boxes out of plain old dressed pine and 6mm hardwood ply. After the mission that was building the carcass I was not in the mood to go overboard with the drawers.
IMG_6149.jpg
I cut the leg pieces on the mitre saw and bodged together a simple jig to cut the taper on the table saw. I initially planned to join the legs using dowels, and bought a Milescraft dowel jig to get that done. Getting a good result from the thing was impossible - it just didn't have the precision that I needed. I did one "okay" leg with the dowels. For the other joins I used a simple router jig and cut mortices for floating tenons, and I got those 3 legs done in the same amount of time it took me to do 1 leg with dowels.
IMG_6160.jpegIMG_6161.jpegIMG_6182.jpegIMG_6183.jpgIMG_6189.jpeg
Finally, I attached the legs to the carcass with long bolts and finished it with 3 coats of satin oil based varnish. The drawers got 3 coats of Danish oil.
IMG_6221.jpegIMG_6196.jpegIMG_6197.jpeg
I'm quite happy with how it came out. Except for the drawer pulls, which were advertised on Etsy as "brass" but are actually thin anodised aluminium. They just cheapen the feel of the whole thing. I'm still on the hunt for some nice brass half-moon handles to replace them with.
If you got this far, thanks for reading.
-
29th June 2023 08:25 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th June 2023, 11:21 AM #2... and this too shall pass away ...
- Join Date
- May 2012
- Location
- Brisbane (Chermside)
- Age
- 71
- Posts
- 2,084
-
30th June 2023, 01:29 PM #3Member
- Join Date
- Oct 2005
- Location
- Mid North Coast NSW
- Posts
- 81
Looks beautiful. Maybe see how you go living with the aluminium handles . I don't think they would have been out of place on a mid-century piece of furniture, aluminium was definitely a material that was used extensively in that time period for various types of furniture . We have loads of mid-century furniture at home and while most of the drawer handles are timber there are none that are brass. All a matter of taste of course!! Great work!!
Man can wait long time with open mouth for roast duck to fly in!!
-
30th June 2023, 07:12 PM #4Intermediate Member
- Join Date
- May 2020
- Location
- Brisvegas
- Posts
- 30
Thanks! I’ve made some basic workshop cabinets and stuff, but nothing nice enough to use inside until this project. I’m planning to step it up a bit for the next one and make a coffee table.
I’ve been using them for a few months now and I’m still unhappy with them the problem isn’t that they’re aluminium as such, it’s just that they’re very thin and cheap feeling. But thanks for the info, maybe I will broaden my search to include aluminium pulls.
-
30th June 2023, 10:37 PM #5Member
- Join Date
- Oct 2005
- Location
- Mid North Coast NSW
- Posts
- 81
That would be an issue on such a quality piece !
Man can wait long time with open mouth for roast duck to fly in!!
-
1st July 2023, 08:22 PM #6SENIOR MEMBER
- Join Date
- Jul 2010
- Location
- melbourne
- Posts
- 382
Nice work.
terrific use of recycled wood
I agree with you on the handles. Though they look ok in pics, but it'd bug me as it seems to you, the "feel" of something each time you touch it is important.
Similar Threads
-
my first restoration mid century modern
By mitchells in forum RESTORATIONReplies: 0Last Post: 1st July 2022, 01:09 PM -
Carving decorate flowers for bedside table - Bedside table inlaid with gold leaf
By Classicwoodwork in forum MEMBERS YouTube VIDEOSReplies: 0Last Post: 18th June 2021, 08:20 PM -
Mid-century Modern sideboard build
By Xanthorrhoeas in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 28Last Post: 2nd August 2017, 07:47 PM -
Mid century modern armchairs
By Tc03 in forum DESIGNS & PLANS FOR PROJECTSReplies: 1Last Post: 4th October 2013, 11:09 AM -
tafe 2009 sofa table & bedside table
By nz_carver in forum WOODWORK PICSReplies: 6Last Post: 3rd December 2009, 11:38 AM