Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 37 of 37
Thread: Quicky causes Cradle
-
31st July 2010, 01:03 PM #31SENIOR MEMBER
- Join Date
- Feb 2007
- Location
- Adelaide
- Posts
- 595
Claw, I think your work is stunning and you are so versitile. It inspires me a bit to tackle a wider range of things. I went to a couple of Neil Scobie's demonstrations at the Adelaide show and noticed a couple of times he made remarks about having to use quick methods when you were doing woodworking for a living. There is no way that I could earn even a half of the minimum wage at the prices people would be prepared to pay, and so that is another reason for admiring what you do.
-
31st July 2010 01:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
31st July 2010, 01:30 PM #32
Hi FP, thanks for the nice words. Here is a paragraph that cought my eye in Alan Peters book A Profesional Approach, I have it on my web site with a couple of others. It isn't easy and I have to give Tack Hama some credit here because I am leaning on her a little here.
Alan Peters - Cabinetmaking a professional approach
"I have purposely not painted a rosey picture of furniture making as a living, as opposed to a very pleasant pastime, for it is not for the faint hearted, and the following is only a guide to the complexities of such a career. At the end of the day, you must realise that no-one owes you a living; you will have to create it for yourself by your own efforts and by the quality of the work you produce.
The thing is, its a visious circle to get the quality you need time but you have to turn your work out quickly to make a living, bugg a.
I love trying new things, I see things and think "I can do that" so off I go, another tangent.
Another quote from Wharton Eshrick , "If it's not fun its not worth doing"
FLETTY turn that bluudy Claw cam off and let me have my coffee in peace
-
31st July 2010, 01:45 PM #33
Say's he who has bottle of Red by his side.
CH really looks professional with the plate now its all done
I do how ever have a question on safety which just came to mind.
The ends. Being for a baby they often put arms above heads, if it is in swing mode the chance of hands or arms through the bars could cause injury, they do look far enough apart.
Would a higher end base be a better option still use dowels though.??
-
31st July 2010, 01:55 PM #34
Hi Wheelin, Australian standards sets out the distances, the gap between the bars is between 12-25mm in this case pretty much 12mm with a slight splay out as it goes up. THe distance from the cradle to the frame also has to be between 12 -25 mm so I made this almost 25. In theory they should only be able to get fingers out, the bars are 10mm plus the 25 means they have 35mm before they get to the frame and even then there is room (25mm) so there shouldn't be any shear effect.
Red hmm, maybe just one, bit of a dull day. Not while using the band saw.
-
31st July 2010, 03:09 PM #35
TY CH they do look wider than that at the bottom was just interested
-
31st July 2010, 03:17 PM #36
Thats ok valid questions that I looked at and paid $140 for two Aust Standards to make sure. There is actualy another 5mm in there also, the timber on the cradle is 22 the bars are 10 and set in the centre so there is another 5 to the edge plus the 25 for the spacer so 40mm to the frame.
-
31st July 2010, 10:01 PM #37
Similar Threads
-
Just a quicky
By Claw Hama in forum FURNITURE, JOINERY, CABINETMAKING - formerly BIG STUFFReplies: 31Last Post: 25th June 2010, 12:09 PM -
Just a Quicky
By Gags_17 in forum HAND TOOLS - POWEREDReplies: 3Last Post: 26th February 2009, 06:57 PM -
Got a quicky today
By Roll Tide in forum WOODTURNING - PEN TURNINGReplies: 6Last Post: 28th April 2007, 02:19 PM -
Quicky
By echnidna in forum WOODIES JOKESReplies: 1Last Post: 13th March 2007, 06:18 PM