Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
29th December 2008, 04:50 PM #1Golden Member
- Join Date
- Oct 2006
- Location
- Dandenong Ranges
- Age
- 47
- Posts
- 816
Do these shelves need extra support?
My first bookshelf is coming together. I'm wondering if the shelves in the first pic below need extra support such as dowels? There's a 5mm rabbit and the shelf is 19mm thick Vic Ash.
The other side of the shelf will be supported by a single bean perpendicular to the shelf (second photo). That side I'm not worried about as the fit is nice and tight and there is plenty of support available.
Secondly, there's a bit of a crack forming in the Oregon. Would epoxy be the right thing to use to fill it to keep it from continuing through?
Thanks,
Af.
-
29th December 2008 04:50 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
29th December 2008, 06:43 PM #2Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Afro - are the shelves Glued? If they are they may hold up in the short term. I suggest you glue them and pin with hidden nails,
The nails may be hidden by using a very narrow chisel to partialy pare away (curl back ) the area where you drive the nails. After punching the nails you then place glue in the area, lay back the pared grain, clamp flat firmly until dry and then sand.
Give the Oregan a couple more days to see how much it splits before filling.
-
29th December 2008, 06:57 PM #3Golden Member
- Join Date
- Oct 2006
- Location
- Dandenong Ranges
- Age
- 47
- Posts
- 816
Yep, they'll be glued.
Similar Threads
-
The Extra One
By Rodgera in forum WOODIES JOKESReplies: 1Last Post: 22nd October 2008, 11:59 PM -
WD 40 and its extra uses.
By Bluegum in forum HINTS & TIPSReplies: 28Last Post: 18th November 2006, 06:48 AM -
Gone from the shelves...
By gemi_babe in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 21Last Post: 25th September 2004, 01:30 PM -
will these shelves sag?
By Phil Mazey in forum WOODWORK - GENERALReplies: 13Last Post: 3rd July 2004, 07:22 PM