Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 15
-
15th May 2013, 07:21 PM #1Novice
- Join Date
- Sep 2003
- Location
- Adelaide
- Age
- 71
- Posts
- 15
My version of the Barrister bookcase Woodsmith Magizine.
Hi!
Just my take on the project which I have seen on an older thread. But this is new.
Just some pictures of Barrister Bookcases I have been making. The project start a long time ago with the purchase of old 2" X 4" Jarrah floor joists, which have been sawn and planed to size. You can see the nail holes, which have probably been there over a hundred years. All glued etc etc.
I have made 24 individual cases, 6 sets of legs and 6 caps. The bottom two cabinets in the stack are 13" high and the top two are 11" high. The last picture shows one of three sets.
Regards Ponce
-
15th May 2013 07:21 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th May 2013, 09:02 PM #2GOLD MEMBER
- Join Date
- Jul 2004
- Location
- Laurieton
- Posts
- 2,251
They look great Ponce. Bit of work doing 24 though.
Bob
"If a man is after money, he's money mad; if he keeps it, he's a capitalist; if he spends it, he's a playboy; if he doesn't get it, he's a never-do-well; if he doesn't try to get it, he lacks ambition. If he gets it without working for it; he's a parasite; and if he accumulates it after a life time of hard work, people call him a fool who never got anything out of life."
- Vic Oliver
-
15th May 2013, 10:51 PM #3Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Classy looking units!!
What,pray tell, is the timber and the finish?? Finish looks sprayed.
-
15th May 2013, 11:26 PM #4Novice
- Join Date
- Sep 2003
- Location
- Adelaide
- Age
- 71
- Posts
- 15
-
16th May 2013, 12:17 AM #5
Mate, That is beautiful.
I love the look of the nail holes, did you fill them with clear epoxy or just leave them.
Certainly Jarrah is one of my favorite timbers to work with, but I hate jarrah splinters
steveThe fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
16th May 2013, 10:08 AM #6Novice
- Join Date
- Sep 2003
- Location
- Adelaide
- Age
- 71
- Posts
- 15
-
19th May 2013, 12:20 AM #7Certainly Jarrah is one of my favorite timbers to work with, but I hate jarrah splinters
steve
Jarrah splinters do suck, but at least you can see them, pine or any other light coloured timber is worse
Cheers Ben
-
19th May 2013, 01:35 AM #8The fact remains, that 97% of all statistics are made up, yet 87% of the population think they are real.
-
21st May 2013, 02:19 AM #9
Love the b-bookcase format !
Love the job you've done of it. How thick is the glass, and how did you fix it in place?
Thanks,
Paul
-
21st May 2013, 09:53 AM #10Novice
- Join Date
- Sep 2003
- Location
- Adelaide
- Age
- 71
- Posts
- 15
Paul,
The glass is 4mm thick, just normal glass. It is secured by Jarrah beading, which was a pain to, make, paint & put in place as it splits when nailed with 1mm brads. I took to it with the dremel and drilled 1 mm holes and it has worked out very well as the head of the brad holds the beading on. I thought I might have trouble with the door banging as it closed, if you let go of it, but when completed the door closing forms a air cushion inside and you can let the door swing down and close by itself. I don't do that but if someone else let go of the door it will not slam and this is all good for the glass as well. The plans called for 3mm toughened glass but that would have been cost prohibitive.
Regards Ponce
-
21st May 2013, 01:31 PM #11
Did you use any silicon adhesive or similar as well?
-
21st May 2013, 05:54 PM #12Novice
- Join Date
- Sep 2003
- Location
- Adelaide
- Age
- 71
- Posts
- 15
-
21st May 2013, 08:31 PM #13
Thanks!
Paul
-
23rd May 2013, 06:48 AM #14
Hi Ponce, nice work on the cabinets. Was this an order/commission or for yourself. What will they be used for? I don't suppose you would make 3 sets on spec ?
Just curious as I am starting to think about how others use/sell /get rid of the things they make.
Regards,
PeterThe time we enjoy wasting is not wasted time.
-
23rd May 2013, 12:10 PM #15
BB in American Oak
Similar Threads
-
woodsmith podcasts
By dadd in forum WOODWORK - GENERALReplies: 2Last Post: 9th June 2009, 09:58 PM