Thread: A William and Mary Yew Stool

Yew (Taxus baccata) is a conifer, thus technically a softwood, but it is anything but a soft wood. Its aroma is akin to that of the Pinaceae family and its colours can resemble that family's on occasion too (with the odd streak of purple), but there the similarities end: It is a much denser timber than Pine, weighing in the region of 670 kg/m³ (42 lb/ft³) versus 510 kg/m³ (32 lb/ft³) for Scots Pine (Pinus sylvestris) and 390 kg/m³ (24 lb/ft³) for Yellow Pine (Pinus strobus). By comparison, American Cherry, a very fine furniture timber, weighs on average, 580 kg/m³ (36 lb/ft³) – all weights at 12% M.C.

Yew is one of the oldest living trees and has been revered since ancient times. It has also been held in the highest regard by joyners and cabinetmakers in more recent centuries, being reserved for high status items of furniture. Yew is an extremely elastic timber (famed for its use by medieval English archers for their longbows) and it also steam-bends exceptionally well. Predominantly for these attributes, Yew was favoured by Windsor chairmakers during the eighteenth- and nineteenth-centuries for both bent and turned chair components.

I relish any opportunity to make a piece of furniture out of Yew and coincidently, I recently acquired a 150-year-old Yew tree from a botanic garden (thank you Jay Baynes ). I have a number of jobs lined up for the timber including this seventeenth-century Yew stuff-over stool.

William and Mary upholstered Yew stool, c. 1690. (Jayne Thompson)

The legs are Ionic columnar turnings with squashed bun feet. The stretchers are of plain rectangular form save for a 1/4" ovolo moulding along the top outside edges. The construction of the stool is unremarkable other than (typical of the period), being assembled dry and drawbored.

I prepared four Yew squares for the legs and turned them on the lathe which was a very pleasant and enjoyable occupation.

The turned Ionic legs.

Ash, Beech and Oak would all be suitable timbers for the top rails, however, Ash and Beech hold upholstery tacks more tenaciously than Oak does. I have plenty of Ash at the moment, so these rails will be of Ash.

I completed making the top rails and was half way through cutting the tennons on the stretchers when I suddenly realised I had forgotten to scratch the ovolo moulding into them!

In the nick of time – the ovolo moulding.

The legs, rails and stretchers were prepared for drawboring and I pared sixteen tapered pegs from English Oak. The stool frame was then knocked together and the pegs inserted into their holes in the legs and hammered home.

The Yew stool frame in-the-white…

… and polished.

The pegs project slightly in imitation of period examples.

Upper turnings.

Extent of wear on stretchers and lower leg.

The hunt is on for something suitable to cover the stool with. Images of the upholstered stool will be posted at a later date.