Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: 5/8 tapered pin reamer
-
15th November 2010, 02:27 AM #1GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
13/32 tapered pin reamer
hi does any one have a 13/32 or 10.3 mm tapered pin reamer that they would like to sell?
is there a roughing and finishing reamer for tapered holes?
i mead it for making a tapered holeLast edited by azzrock; 15th November 2010 at 09:42 PM. Reason: i got the size wrong
-
15th November 2010 02:27 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
15th November 2010, 03:29 AM #2GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
Not sure about the 2 reamers but you will need to use a tapered drill.
-
15th November 2010, 03:34 AM #3GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
i remember when i was an apprentice we used a roughing reamer to cut the Morse taper in the tail stock of the lathe we made. i haven't seen one since thou
-
15th November 2010, 03:52 PM #4GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
Are you after a reamer for the 5/8" or 10.3mm or both.
-
15th November 2010, 08:34 PM #5
I think he wants a reamer to ream a hole for a tapered pin , not a tail stock .
I've never seen a tapered drill for drilling holes for taper pin reamers ,
just drill a hole the smallest diameter of the reamer and have at it , they are mostly hand reamers any way.
No roughing or finishing reamer just the one .
Biggest taper pin reamer I have is a no 6 , nowhere near 5/8"
Kev"Outside of a dog a book is man's best friend ,inside a dog it's too dark to read"
Groucho Marx
-
15th November 2010, 08:54 PM #6GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
I believe from what was asked that he was after a tapered reamer for either of the sizes he stated or both as the sizes given are not covered by the 1 reamer.
In regards to taper pin holes I have in most cases allways roughed with a tapered drill first then reamed to finished size.
In a pinch you could drill a series of stepped holes through your workpiece and finish with the reamer but care would need to be taken,depending on the quality of the finished fit and application.
-
15th November 2010, 09:36 PM #7GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
yah good question i only need the 10.3 or 13/32 reamer i all ready have the. 5/8. it must be all these nights at work. playing with my head.
-
15th November 2010, 09:46 PM #8GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
i do need it for making a tapered hole.so one with a no. 2 morse taper would be great. i was just asking because i thought someone might have one laying around. like i have tool that don't get much use.
-
18th November 2010, 12:16 PM #9GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Can't help with the reamer sorry(althought I have thought about buying a couple now and then).
Yes there are roughing reamers.
An MT2 reamer isn't going to go into a 10.3mm hole
MT2-2PCE Morse Taper Reamer Set (COARSE & FINISHED) (eBay item 270664699221 end time 16-Dec-10 09:47:03 AEDST) : Industrial
Do you mean MT1?
MT1-2PCE MORSE TAPER REAMER SET (COARSE & FINISHED) (eBay item 350407197744 end time 24-Nov-10 09:19:43 AEDST) : Industrial
Stuart
-
18th November 2010, 01:12 PM #10
These people sell Tapered Reamers, amongst a few other things.
-
18th November 2010, 07:24 PM #11GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
the no. 2 morse taper part was for holding it in my tail stock. thanks for the help.
-
18th November 2010, 08:03 PM #12GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Doh I thought I might have been missing something
Similar Threads
-
How do you Use a hand reamer
By rodm in forum METALWORK FORUMReplies: 11Last Post: 7th February 2010, 08:28 PM -
looking for taper reamer
By contrebasse in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 14Last Post: 4th March 2008, 10:04 PM -
1MT Reamer
By Garell in forum METALWORK FORUMReplies: 3Last Post: 11th May 2006, 11:24 PM -
Tapered Peg Reamer - Now do I sharpen it?
By bitingmidge in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 15Last Post: 7th July 2005, 06:46 PM