Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 17 of 17
-
20th July 2014, 05:35 PM #16Senior Member
- Join Date
- Jan 2009
- Location
- colyton
- Age
- 74
- Posts
- 207
runout
That particular backing plate was given, as a rough casting, by me for free to the previous owner with the rear register and thread done only, the machining of the rest was abandoned as it had a small casting flaw in the threaded area which meant I couldn't sell it. The trouble with the old castings was they were cast with a core which left a hole to save on boring time. As the core always moves a little when they pore it, you have to use the cole hole as the datum for the thread, this is necessary because this is the only way to guarantee you will clear the cast iron scale when threading and machining the rear register. The unfortunate bi-product of doing it this way is it is rarely central to the overall casting and requires quite a lot of machining to true up the rough cast faces.
Because of the reject rate with this type they were discontinued in favour of machining from bar stock. So long as you don't disturb the rear register on the hob, you should be able to machine the front and rear faces so they will all be concentric to the register and thread and therefor in balance. I hope my phone call helped, if not let me know what you need.
Mal
-
20th July 2014 05:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th July 2014, 06:07 PM #17
Thanks Mal,
It'll probably be next weekend or so when I get chance to have a look again but I'll let you know how I get on and give you a shout if I get stuck!
Thanks for the call earlier.
Thx
J
Similar Threads
-
Face plate fix
By Stustoys in forum METALWORK FORUMReplies: 35Last Post: 13th November 2010, 12:42 AM -
Fitting a 250mm chuck on a face plate, 12x36 lathe
By Dave J in forum METALWORK FORUMReplies: 8Last Post: 7th August 2010, 12:57 PM -
Stuck Face Plate
By Michael_Bike in forum WOODTURNING - GENERALReplies: 7Last Post: 6th November 2006, 11:37 AM -
Face plate?
By A.WILLIAMS in forum WOODTURNING - GENERALReplies: 4Last Post: 30th September 2006, 02:06 AM -
using a face plate as a sander
By ss_11000 in forum WOODTURNING - GENERALReplies: 7Last Post: 31st January 2006, 11:08 PM