Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
24th June 2021, 04:40 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Cutting imperial threads on a metric 260
G’day Folks
I’ve been asked if I can help with a project that’s interstate and I’m trying to work out how I might go about it. It’s a “love job” so I don’t want to break the bank.
When I get there I won’t have access to all my usual tools. Most of what I will have should still be ok because apparently no-one has used them since I was last there. I can bring things with me of course but I don’t want to be carting too much around; certainly nothing I can’t lift myself.
One way to solve the issues involved will be to rebuild broken parts. However, some of these will have imperial threads and the lathe I know I will have easy access to will be a metric Hercus 260.
I was hoping someone here might be able to help me with some of the questions I have?
Are change gears available for the hercus 260 metric model to allow imperial thread cutting?
If so what range would they give?
What do they cost and where might I get them?
Assuming the machine is still up to spec is there any accuracy compromise involved?
Is there good reference material available on this that I could download (or purchase) so I can minimise the trial and error in setting up?
thanks to any who can assist!
horaldic
Read the full thread at metalworkforums.com...
-
24th June 2021 04:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Metric Vs Imperial
By Peter G in forum WOODWORK - GENERALReplies: 127Last Post: 9th June 2019, 11:11 PM -
metric thread cutting on old imperial (new visby) lathe??
By gpigeon in forum METALWORK FORUMReplies: 17Last Post: 12th August 2014, 03:13 PM -
Gear train to cut imperial threads on metric lathe (AL 340)
By 19brendan81 in forum METALWORK FORUMReplies: 11Last Post: 17th January 2012, 03:15 PM -
Cutting Metric Threads
By Abratool in forum THE HERCUS AREAReplies: 51Last Post: 2nd October 2011, 09:25 PM -
Metric Thread Cutting on Model 9A with Imperial Lead Screw
By Rodd Perrin in forum THE HERCUS AREAReplies: 3Last Post: 21st September 2009, 02:14 PM