Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Hercus 9 Model C identification
-
11th January 2020, 12:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,423
Hercus 9 Model C identification
Hi All,
I've finally looked at a Hercus lathe that has been sitting in my garage for a number of years and was hoping the forum can help with identifying what I actually have. I can see on the Screw Threads and Power Feeds plate that is it a model C machine number 3589. I've also looked at the bed and tailstock and the serial on these shows as C9819. I've attached a couple of photos with the serial numbers.
I've looked through the forum and it looks like the machine number 3589 would mean that is was made in 1951 and then the serial number of 9819 is 1965. Does that mean the lathe has been put together with parts or is it just the bed and tailstock number that show when the machine was manufactured?
Thanks,
Richard
Attached Images
- IMG_20200110_152838.jpg (115.0 KB)
- IMG_20200110_152749.jpg (49.3 KB)
- IMG_20200110_152740.jpg (102.7 KB)
- IMG_20200110_152819.jpg (172.8 KB)
- IMG_20200110_152912.jpg (165.0 KB)
Read the full thread at metalworkforums.com...
-
11th January 2020 12:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Model A Apron on Model C Hercus Lathe?
By MWF FEED in forum THE HERCUS AREAReplies: 0Last Post: 11th December 2018, 09:30 PM -
Newly Acquired old Bench Grinder model identification..
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 16th August 2018, 11:10 PM -
hercus model A 1951 model
By pjh4159 in forum THE HERCUS AREAReplies: 5Last Post: 21st August 2011, 03:15 AM -
Hercus identification please
By mañana in forum THE HERCUS AREAReplies: 4Last Post: 16th August 2011, 06:24 PM