Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
-
2nd December 2010, 04:24 PM #1Senior Member
- Join Date
- Aug 2010
- Location
- Springwood
- Posts
- 148
Hercus Extended Cross Slide Casting
Hi All, As promised here area some pictures of the Extended Cross Slide or Slotted Cross Slide Casting.
-
2nd December 2010 04:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd December 2010, 05:28 PM #2GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
have you talked about this in some older post
-
2nd December 2010, 07:10 PM #3Senior Member
- Join Date
- Aug 2010
- Location
- Springwood
- Posts
- 148
Yes, have a look at the taper turning attachment thread. I've offered the cross slide castings for sale. Also see the market place.
Cheers
Peter.
-
2nd December 2010, 07:48 PM #4Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 80
- Posts
- 2,251
SM1,
Have you seen Paula's post on the Practical Machinist Southbend Forum, she is amazing with her skills. With a lady friend like that, you could dispense with all the mushy stuff!
Machining A T-Slotted Cross Slide - Practical Machinist - Largest Manufacturing Technology Forum on the Web
A bit of topic, but do you have castings for the Hercus milling attachment vice? I did ask in an earlier post, you may have missed it.
Ken
-
2nd December 2010, 08:19 PM #5Senior Member
- Join Date
- Aug 2010
- Location
- Springwood
- Posts
- 148
Ken, I do have the vice castings. Two items, vice body and movable jaw. Are you interested?
I've seen Paula's post on the slide. Just imagine the progress with two of you in the workshop. Google Cherry Hill and you'll find one of the best model engineers alive today.
Cheers,
Peter.
-
2nd December 2010, 10:03 PM #6Product designer retired
- Join Date
- Nov 2006
- Location
- Heidelberg, Victoria
- Age
- 80
- Posts
- 2,251
Hi SM,
Yep, I'm interested, what sort of dollars are we looking at? Do you also have machining drawings for all the components plus castings?
Ken
-
3rd December 2010, 12:11 AM #7GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
ive done this before not from a casing but from plate. it wasn't to hard and was an interesting job. if i remember i used dowl to measure the dove tails
-
3rd December 2010, 07:18 AM #8Senior Member
- Join Date
- Aug 2010
- Location
- Springwood
- Posts
- 148
Similar Threads
-
Experimental Instrument Prototype (think wiessenborn cross guqin cross I dunno)
By NebulaGuitars in forum MUSICAL INSTRUMENTSReplies: 9Last Post: 14th April 2010, 10:22 PM -
Cross-slide vise
By Tiger in forum WOODWORK - GENERALReplies: 8Last Post: 6th March 2010, 06:41 PM -
Cutting thread and nut on cross slide
By B the B in forum THE HERCUS AREAReplies: 13Last Post: 18th November 2009, 01:36 AM -
Extended fence on T&G woodie.
By JDarvall in forum HAND TOOLS - UNPOWEREDReplies: 3Last Post: 19th October 2006, 09:38 PM -
Compound Mitre Saw - To Slide or not to Slide?
By Tilly in forum HAND TOOLS - POWEREDReplies: 11Last Post: 3rd June 2005, 05:14 PM