Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
2nd March 2010, 07:28 PM #1Intermediate Member
- Join Date
- Jan 2010
- Location
- Sydney Australia
- Posts
- 42
Sheraton lathe. Need some pull it apart info...
Hi all.
I picked up this little beauty a while ago but haven't had time to work on it until now.
The cross feed screw is fairly worn (the gear seems ok but the area around the handle is worn) and there is a lot of slop.
My Brother inlaw has access to a lathe & has offered to square the ends up so I can install a brass spacer & take out the slop but I have no idea how to get it apart.
Any idea how this comes apart?
Thanks.
Al
-
2nd March 2010 07:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd March 2010, 09:18 PM #2Mechanical Butcher
- Join Date
- Oct 2004
- Location
- Southern Highlands NSW
- Posts
- 920
Looks just like on a South Bend / Hercus. The slotted nut needs a modified screwdriver to undo. Get a big blade screwdriver and grind away the centre so as to clear the male thread.
Jordan
-
2nd March 2010, 09:48 PM #3GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
Looking at the End of the Half Moon Nut it looks as if it is peened over.
You may need to file it a bit or touch it on a linisher or similar to be able to remove it easily.
Another allternative to the modified screw driver is to use a pair of circlip pliers,it shouldnt be that tight.
-
2nd March 2010, 10:38 PM #4Senior Member
- Join Date
- Jul 2007
- Location
- Melbourne
- Posts
- 115
When you remove the handle, there should be a pin. Leave it alone as it clears the bush.
See photo.
Peter
PS I would unscrew old nut by tapping with a pin punch, then remake a new one.Last edited by brittleheart; 2nd March 2010 at 10:41 PM. Reason: extra comment
-
3rd March 2010, 07:36 PM #5Intermediate Member
- Join Date
- Jan 2010
- Location
- Sydney Australia
- Posts
- 42
Thanks all.
I managed to get it apart with minimal fuss & damage.
Al
Similar Threads
-
Sheraton Lathe
By electrosteam in forum METALWORK FORUMReplies: 4Last Post: 9th July 2009, 11:38 AM -
Sheraton Lathe information?
By Greg Q in forum METALWORK FORUMReplies: 18Last Post: 25th June 2008, 09:36 PM -
The Leady Lathe info
By hughie in forum WOODTURNING - GENERALReplies: 4Last Post: 14th May 2006, 01:07 AM -
Need "SHERLINE" Lathe Info
By PenRex in forum WOODTURNING - GENERALReplies: 7Last Post: 5th October 2001, 11:17 PM -
Lathe info wanted
By themunch2 in forum WOODTURNING - GENERALReplies: 2Last Post: 1st April 2000, 09:53 PM