Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Thread dial project
-
29th April 2020, 12:10 AM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,401
Thread dial project
For a SB I think. I made one for my Sheraton but I made a mistake with the gear . It should be a normal flat faced gear to mesh with the slotted leadscrew, I put a concave face ( as seen in this project ) on the gear and it doesn't mesh correctly , it pushes itself off the leadscrew
Attached Images
- New Image.jpg (55.7 KB)
- New Image2.jpg (71.5 KB)
- New Image3.jpg (72.0 KB)
- New Image4.jpg (62.0 KB)
Read the full thread at metalworkforums.com...
-
29th April 2020 12:10 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
How to re-calibrate my Thread Dial Indicator
By oohsam in forum METALWORK FORUMReplies: 6Last Post: 16th June 2014, 08:13 PM -
Thread dial indicator for Lathes
By Jors in forum METALWORK FORUMReplies: 4Last Post: 24th December 2012, 07:22 PM -
Thread Chasing Dial
By 19brendan81 in forum METALWORK FORUMReplies: 11Last Post: 14th December 2009, 03:00 PM -
Does anybody have plans for a thread dial
By bitza500 in forum THE HERCUS AREAReplies: 3Last Post: 16th June 2009, 03:51 AM -
Hercus thread dial gauge?
By neksmerj in forum METALWORK FORUMReplies: 10Last Post: 4th June 2008, 04:56 PM