Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: travelling steady
-
27th December 2010, 02:54 PM #1GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
travelling steady
hi all. just wondering if the travelling steady on a hercus 9" bolts to the rear of the
cross slide?
and has any one here made a fixed or travelling steady for a 9". they just seem a little expensive. im shore they are good quality and all. but nearly half the price of my hole machine.
-
27th December 2010 02:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th December 2010, 05:38 PM #2.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Azzrock,
They bolt onto the tailstock side of the saddle. The cross slide is in the way in the photo. It's made to fit the saddle equipped with the standard slide. I would have to install spacers for clearance to enable the steady to fit under the extended slide.
Regards Bob.
-
28th December 2010, 12:23 AM #3GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
hi bob thanks for the reply. do u use yours very often. great photo. whats the deal with your saddle.
that looks handy. did you make it?
-
28th December 2010, 12:37 PM #4
the T-sloted cross slides are quite rare but was offered as an extra by Hercus you can use it for all sorts of stuff like odd boring and milling jobs actually i think the T-sloted slide on the Myfords contributes a great deal to there popularity since they came standard
if you are interested here is where you can get a casting
this thread details its machininghappy turning
Patrick
-
28th December 2010, 01:31 PM #5.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
No, I didn't make it. I bought it new from Hercus along with a boring table. They are both 260 items. The extended slide is higher than the standard cross slide by about 4mm. Using the Hercus 4 way toolpost requires the instalation of a thinner spacer under the post. Just having the ability to mount a rear tool post makes the acquisition of an extended slide worthwhile.
I have 2 small milling machines and sometimes it is not possible to machine a surface because there is insufficient space between the cutter and the table to mount the workpiece. The lathe has proven handy in these situations. The last photo below shows a set up using the boring table to support a component of a slotting head I was making, that required spot facing. Some fiddly shimming was required to centre the cutter on the same centreline of an existing hole.
So far I have never used the travelling steady. I should just so I know what it's like to use.
I have used the fixed steady on numerous occasions and wouldn't be without it.
If I had to buy (or make) one before the other, I'd choose the slide first.
Regards
Bob.
p.s. The masonite hides the mess in the background.
-
28th December 2010, 06:27 PM #6Mechanical Butcher
- Join Date
- Oct 2004
- Location
- Southern Highlands NSW
- Posts
- 920
I like Bob's Hercus slotted cross slide over my South Bend / Boxford type that has the mounting hole for the compound slide farther back, with a slot on the nearside of it. I can't get the cutting tool far enough forward for some jobs.
I see the milling table has a feature that would help, in the form of a machined arc that lets it move over the cross slide dial instead of bumping into it.
Jordan
-
29th December 2010, 10:46 PM #7
nice set up photos Bob is that a scissor knurl on your rear tool post?
happy turning
Patrick
-
30th December 2010, 11:23 AM #8.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Sure is Patrick. My homemade version.
Similar Threads
-
Travelling salesman.
By rosewood in forum WOODIES JOKESReplies: 0Last Post: 6th May 2009, 02:22 PM -
Travelling with Laptop
By John Saxton in forum COMPUTERSReplies: 16Last Post: 1st April 2008, 06:27 PM -
Travelling Aus with a lathe
By beiffe in forum WOODTURNING - GENERALReplies: 16Last Post: 8th June 2007, 10:18 PM -
Travelling to Italy
By Shane Watson in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 21Last Post: 25th June 2006, 08:32 PM -
Travelling Irrigator
By Peter R in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 1Last Post: 30th September 2004, 05:53 PM