Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 47
-
15th December 2005, 03:24 PM #16
The dispatch place in Melbourne said the total parcel is 33kg - the machine alone is 26kg.
Freight from Melb to Bris is $83.
I got the Dewalt DW788 -XE for $360 Happy about that.
I've paid for it and organised a courier to collect it on Monday so should have it Wednesday just in time for Christmas - HO HO HO
CheersCheers
TEEJAY
There is a very fine line between "hobby" and "mental illness"
(Man was born to hunt and kill)
-
15th December 2005 03:24 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
15th December 2005, 03:29 PM #17Originally Posted by kiwidadtomykidz
CheersCheers
TEEJAY
There is a very fine line between "hobby" and "mental illness"
(Man was born to hunt and kill)
-
15th December 2005, 03:36 PM #18Originally Posted by Iain
Actually Iain your posts on this machine has been the impetus for my choice of it once I missed the Hegner. I do have a dewalt sliding saw and love it too - they seem pretty good.
CheersCheers
TEEJAY
There is a very fine line between "hobby" and "mental illness"
(Man was born to hunt and kill)
-
15th December 2005, 04:00 PM #19
You will enjoy it, although like most things, I wish the table was a bit bigger , I think that is about the biggest on the market5 apart from the Excalibur 30".
Don't forget to unplug it when it's not running as you will hear a slight hum, I prefer to err on the side of caution.
When doing inside cuts I stick a block of wood under the arm to hold it up while threading the blade through the work.
Carbatec sold their last 788 for about $950 but I got mine from de Walt as I was doing demo work for them at the time, cost me two weekends at Warburton Winterfest, and they got their pound of flesh.
I used to use it on a table befoe I made a stand and Icouldn't believe how steady it was, almost no vibration.
My previous saw was a Proxxon and it would jump around all over the bench, even the GMC is smoother, and I have two of them I use for teaching, when anyone is interested.
How many sleeps before it arrives, in time for the weekend.Stupidity kills. Absolute stupidity kills absolutely.
-
15th December 2005, 05:09 PM #20
Cheers Iain,
Courier collects the machine Monday and I get to touch it Wednesday and then SWMBO takes it from me till Christmas. Just do a very quick run on it to be sure it goes .
I have just ordered 3 gross of blades from Mikesworkshop hope i got the right ones - went for the flying dutchman SR skip tooth with reverse teeth #1,3,5,7,9 and 1/2 a gross of a new spiral blade FD-NS #1,3,5.
Should cover most things I hope.
I also bought a flourescent magnifying glass - big clamp on type. There is a type 3 that gives 1.75 magnification and mine is a type 5 don't now it's magnification hope it isn't too strong.
CheersCheers
TEEJAY
There is a very fine line between "hobby" and "mental illness"
(Man was born to hunt and kill)
-
15th December 2005, 05:18 PM #21
wow 3 gross, you are either planning on doing a lot of cutting or want a lot of blades in stock
Brett
Only Robinson Crusoe could get everything done by Friday!
-
15th December 2005, 06:15 PM #22Originally Posted by oges
I don't know how easily they break and which one's I will prefer.
I don't want to run out and I figure freight is a significant part so buy a bigger order then don't run out and have enough for all uses for a while. I know I will want the heavier one's for stack cutting and thinnner for the single layer thinner stuff.
At first I thought 3 gross no way I need that much then started ordering what I wanted and before I knew it there was 2.5 gross there so i thought what the heck 1/2 a gross more and he gives a 10% discount so I did. Sure to use it all one day - I hope.
CheersCheers
TEEJAY
There is a very fine line between "hobby" and "mental illness"
(Man was born to hunt and kill)
-
15th December 2005, 06:33 PM #23
From my experience with FD blades, they will dull/blunt before you break them. Very rarely do I ever get a breakage with them.
Brett
Only Robinson Crusoe could get everything done by Friday!
-
15th December 2005, 06:45 PM #24Originally Posted by oges
I appreciate thickness has some bearing but most of these are say 6mm single layer or up to 25mm stacked without approaching the 50mm rarer stuff.
CheersCheers
TEEJAY
There is a very fine line between "hobby" and "mental illness"
(Man was born to hunt and kill)
-
16th December 2005, 08:59 AM #25Originally Posted by TEEJAY
CheersCheers
TEEJAY
There is a very fine line between "hobby" and "mental illness"
(Man was born to hunt and kill)
-
16th December 2005, 09:05 AM #26Originally Posted by TEEJAY
Flames I have never encountered yet.
As for breaking blades, expect a few depending upon timber density, operator impatience etc, you will soon learn to feel your way through.Stupidity kills. Absolute stupidity kills absolutely.
-
16th December 2005, 10:01 AM #27
Sorry for not replying earlier, hard to tell time wise, as it depends on how fast the operator is at cutting. I have had some blades last a few projects, where some have needed a few blades for a project .. all depends on the thickness and density of the timber you are cutting.
There is no rule for when they will dull, no shame if yours dull quicker at times (unless it dulls very quickly, which the FD's shouldnt).
Like Iain said, look out for the signs. You will notice you will be applying a bit more of a push on the timber as it dulls (but this is also noticable if cutting along a heavy grain) and the smell of burning too.
Have fun .. you got plenty of blades to play with.
Might have to order some myself as mine have gone awol after moving house the other week.Brett
Only Robinson Crusoe could get everything done by Friday!
-
16th December 2005, 10:11 AM #28
There is another character building feature with scrollsawing, the blade will grab the timber (if you are not holding it firmly) and bounce it up and down on the table, makes a hell of a racket and gives you a bit of a fright.
It's quite harmless providing your heart is OKStupidity kills. Absolute stupidity kills absolutely.
-
16th December 2005, 10:19 AM #29
I love it when demonstrating at the Sydney WWW show. You have people leaning in close to have a good look at what you are doing, you are chatting to them and lose concentration and little and let the wood bounce when doing a tight turn ... soon has them back at tad
Brett
Only Robinson Crusoe could get everything done by Friday!
-
16th December 2005, 10:19 AM #30Originally Posted by IainRegard Clay
Measure Twice, Cut Once, @#$% Get another Piece.:confused: