Thread: New GMC Scrollsaw

I dont know about this machine, but its about time they offered a variable speed pinless scrollsaw. Does it give you a price in the brochure.

How do you get a copy of this brochure?

While at the Melbourne wood show I grabbed a copy from the GMC stand.

I actually rang GMC up to find out the retail price but they were unsure or just did not want to tell me.


Daniel

the price i have spotted for the scroll saw at bunnings was 179.00
Note this price is for the old vari speed not the new one as depicted in the new catalog

They have this new scroll saw on there web site now. The address is as below.

http://www.gmcompany.com/13_LS16SS.jpg

Daniel

interested to see how the price compares to the Delta when it comes out.

GMC seem to be throwing lasers on everything these days, cant see how it would help that much on a scrollsaw seeing as with most blades you have to feed at a bit of an angle. I guess they would put a laser on a screwdriver if they made those!

Brett

don't laugh it's possible they may just bring lazer pointed screw drivers out for the vision impaired

If they are on the shelves now I might go and try one out.

Is it worth paying an extra $99 for the variable speed unit and I must not forget the much needed laser as well.

I have one of the $55 GMC's with a set of $25 hegner clamps total $80.


Daniel

Gday all

Asked a GMC rep at a DIY night about 3 weeks ago regarding the new scrollsaw, he said Bunnings weren't stocking it yet but it was able to be specially ordered through them.

I have one of the existing GMC models with the GMC allen keyed pinless blade adaptors. The allen keying is a pain when doing frequent inside cuts, as is the fiddly nature of getting the bottom holder back on.

Does anyone know if any other adaptors (Hegner or otherwise) are better, ie. an alternative to the allen keyed grubscrews, and a bottom adaptor that stays on unless removal is actually needed.

Or has anyone modified the GMC adaptors to improve them?

Any and all responses appreciated...........cheers.........Sean

Sean

I have the old GMC and have it fitted with Hegner blade clamps that use a clock movement key to tighten it. Works quite well and allows for a quick change. Not as quick as the Delta Quickset II clamp but it does me fine.

Might check the GMC stand at the Sydney WWW show and see if they have the new saw there, interested to see what its like.

Originally Posted by oges

Sean

I have the old GMC and have it fitted with Hegner blade clamps that use a clock movement key to tighten it.

Gday Brett, where did you get the Hegner clamps & how much? Do they mount on the same "tongue" ( :eek: ) as the GMC clamps or do they use the pinned blade tongue? I haven't stripped (yet) the grub screws on mine, but find the bottom clamp very fiddly to fit on the tongue when doing a lot of inside cuts, are the Hegner clamps better in that regard somehow?

Thanks for the response.....cheers........Sean

I got mine from The Woodworks in Sydney for about $16 each I think they were. http://www.thewoodworks.com.au/detai...qskudata=S1101 and about $12 for the key.

What I did was to take the whole gmc clamp off including the silver thingy and just used the bolt to secure the Hegner clamp to the arms. The clamp doesnt sit how it would on a Hegner saw but I find it works just as well sitting on its side. If you want pictures of mine I can try and arrange to take some.

Anyway hope this helps.

Thanks Brett, hadn't heard of mounting it that way, great idea ! If I understand you right the clamps would be mounted flat with the v edge facing the operator? Would be good for inside cuts as the clamp would be held securely and the bottom one would stay in place while just loosening the top grub screw with the key & pulling the top end of the blade forward. One advantage of the Hegner clamps in their normal orientation is supposed to be that the V edge allows a degree of pivoting front to back reducing blade fatigue and breakage, do you find any blades break off at the grub screws without this pivoting ability?

I might try mikesworkshop.com for the clamps, his prices & service are v good.

From what you say it sounds like it works well........thanks a heap.....Sean

Yes I have them mounted flat on my saw, I know its not the intended way they are meant to be used but I find it works well for me. I use the flying dutchman blades and do not find I get many breakages, most of the time I change the blade because it has become dull.

Oges, and others, when the blade becomes dull and you are too tight to buy another blade, make a false table with a piece of 1/2 to 1" MDF, drill a hole in the middle and you now have the means of using the previously unused portion of blade.
If using crown blades use this method then repeat after turning the blade upside down.
"Born a Scot and proud of it"
By adopting this method I am able to save enough to buy a bottle of single malt every five years!