Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Pinless conversion
-
27th May 2020, 11:10 PM #1
Pinless conversion
G'day all,
I have a Ryobi RSW1240G scroll saw and am very happy with it apart from the pinless blade adapter. It is a pain in the butt when attempting detailed scroll work involving undoing the blade, moving it to a new hole ready to cut and doing it up again and repeating the process many times.... While this is fiddly and time consuming, my main concern is the thumb screws and threads will wear out quickly.
Does anyone know of a better setup I could adapt to the Ryobi saw?
I have looked at these but the reviews are mixed..... Axminster Pair of Blade Clamps for AWVFS Scroll Saw - Scroll Saw Accessories - Sawing - Machinery Accessories - Accessories | Axminster Tools & Machinery
Any help/advice would be greatly appreciated. Be good if the supplier was local (Aussie) too.....
Cheers, Graeme
-
27th May 2020 11:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th May 2020, 10:38 PM #2GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
Hi Graeme,
Contact Helen Harris for Scroll Saw Blades and other Accessories [email protected] 0428 826 224. Helen Harris 08 8531 3440 ...
Regards
KrynTo grow old is mandatory, growing up is optional.
-
31st May 2020, 09:51 AM #3
Problem solved thanks to Helen
Similar Threads
-
scroll Saw Pin to Pinless
By raye43 in forum SCROLLERS FORUMReplies: 3Last Post: 16th July 2010, 09:19 PM -
Pin and Pinless question
By munruben in forum SCROLLERS FORUMReplies: 24Last Post: 4th August 2008, 10:07 PM -
GMC pinless blade adaptor
By Enraf in forum SCROLLERS FORUMReplies: 0Last Post: 13th February 2006, 01:08 PM -
Pinless conversion - questions
By arose62 in forum SCROLLERS FORUMReplies: 5Last Post: 9th June 2005, 09:44 PM -
pinless blade conversion?
By vickyj in forum SCROLLERS FORUMReplies: 18Last Post: 17th January 2004, 10:48 PM