Needs Pictures: 0
Results 1 to 4 of 4
Thread: Redneck Rally
-
20th September 2020, 01:54 PM #1Senior Member
- Join Date
- Jan 2012
- Location
- Yenda NSW
- Age
- 74
- Posts
- 344
Redneck Rally
I was asked to make 2 of these for prizes for the Riverina Redneck Rally I have finished one but still painting the second one. I stack cut these & used 3mm ply with a 6mm MDF backing. The blades used were No 1 & 2/0 FD silver reverse. It is 17.5 inches wide, I think the painting etc took longer than the cutting but I am quite happy as to how it turned out. Must get back & finish the second one before I knock over & lose all the small parts. The one with the 2020 date is the transfer I used as the pattern.
IMG_0754.jpgIMG_0755.jpg
-
20th September 2020 01:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th September 2020, 02:11 PM #2
There very impressive.
Cheers Matt.
-
21st September 2020, 07:31 AM #3SENIOR MEMBER
- Join Date
- Feb 2018
- Location
- Shepparton
- Posts
- 508
I like lots. Stack cutting is the way to go and turns out to be the quickest of the whole job then comes the painting and this is always challenging, but you have done these prizes proud.
-
21st September 2020, 12:11 PM #4
They’ve come up a treat Peter.
Nice done sir.
Cheers Peter
Similar Threads
-
You’re An EXTREME Redneck When
By Ian Smith in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 37Last Post: 19th December 2009, 06:22 PM -
Redneck
By ernknot in forum WOODIES JOKESReplies: 3Last Post: 9th June 2006, 10:47 AM -
Redneck cowboy
By multinut in forum WOODIES JOKESReplies: 1Last Post: 31st December 2003, 05:58 PM