Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
19th December 2014, 02:53 PM #1New Member
- Join Date
- Dec 2014
- Location
- Western australia
- Posts
- 1
Ryobi scroll saw not working (RSW1240G)
i bought a ryobi RSW1240G scroll saw recently and after good usage it has suddenly seized up. When the tensioning is low the saw will turn on and start as normal and respond to the speed adjustment however as I increase the tensioning the saw gets faster and faster even with the speed setting on its lowest. When the tensioning is high enough to hold a blade the motor turns a quarter and then stops and makes a continuous vibration noise as if its stuck. I have cleaned it out with a compressor hose anybody have any idea whats wrong?
-
19th December 2014 02:53 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th December 2014, 03:56 PM #2Senior Member
- Join Date
- Apr 2012
- Location
- Shepparton
- Posts
- 140
Similar Threads
-
Ryobi Scroll Saw Tension
By hires54 in forum SCROLLERS FORUMReplies: 0Last Post: 9th August 2014, 12:27 PM -
RYOBI 125W Scroll Saw (405mm) (RSW1240G)
By sikm in forum SCROLLERS FORUMReplies: 18Last Post: 23rd September 2013, 03:36 PM -
Ryobi ESW1240 SCROLL SAW
By Rysiek in forum SCROLLERS FORUMReplies: 0Last Post: 28th May 2009, 12:04 PM -
RYOBI 16"SCROLL SAW SC-160
By XXJJJXXX in forum SCROLLERS FORUMReplies: 3Last Post: 20th June 2005, 05:22 PM