Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: New to Scroll Sawing
-
26th June 2013, 08:36 PM #1
New to Scroll Sawing
Hello Scrollers
Two days ago I bought a Carbatec Scroll saw. I am cutting 19mm radiate pine, it is proving to be hard work. I have cleaned all the grease off the table and this revealed coarse machining on the table which I polished out with 400 grit wet & dry, the pine slides well on the table. I am using 9.5 TPI skip tooth blades.
Does anybody out there have any suggestions?
Thank you
Gerard
-
26th June 2013 08:36 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th June 2013, 09:27 PM #2
A good idea is to put a non silicon based polish on the table. I use Johnson and Johnson floor wax from the 60's works well and won't affect the wood when you go and put the finish on. Might have to look for a similar product
PeteWhat this country needs are more unemployed politicians.
Edward Langley, Artist (1928-1995)
Similar Threads
-
new to scroll sawing
By woodworkwannabe in forum SCROLLERS FORUMReplies: 4Last Post: 5th November 2009, 09:31 PM -
Scroll Sawing
By Woodscratcher in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 5Last Post: 11th February 2009, 01:12 AM -
Sawing
By Wood Chip in forum WOODWORK - GENERALReplies: 5Last Post: 14th January 2009, 05:44 AM -
Timber for scroll sawing
By LiliB in forum SCROLLERS FORUMReplies: 23Last Post: 5th January 2009, 05:24 PM -
What is Re-sawing?
By Farmall Teen in forum WOODWORK - GENERALReplies: 5Last Post: 20th February 2006, 03:25 PM