Needs Pictures: 0
Results 16 to 20 of 20
Thread: Hinges for the Box Makers
-
18th June 2022, 06:54 PM #16
Rail Hinge box
This is my first set of the new Rail Hinges.
The flat lid meant I needed to shorten the screws so they didn't extend through.
The Jewellery box is a very old Australian Red Cedar and the inset panel in the lid is a special piece of Birdseye Maple.
I like the firm movement of the Rail Hinges. It gives the lid a solid feel.
Very good quality.Scally
__________________________________________
The ark was built by an amateur
the titanic was built by professionals
-
18th June 2022 06:54 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th June 2022, 07:41 PM #17GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,039
Thanks to all the members who have taken advantage of this offer so far. I'll shortly have available some tooling that will directly relate to the fitting of these hinges. Firstly some Sutton 2.3mm drill bits, forum price $4.40 each, these are the ideal size for the #3 screws. Should be available in the next day or so. Secondly 8mm two flute spiral solid carbide downcut router bits for cutting the mortise, forum price $28.00 each. These are top quality HRA92.5 and will last for many years if properly cared for. Should be available in 10 days or so.
Cheers,
David
-
24th July 2022, 10:24 PM #18GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,039
Offer Closed
Thanks again to all the members who took advantage of this offer. Just to confirm the information in post #9 the offer expired on 30th June, 2022.
-
19th October 2022, 04:59 PM #19
Will you be offering any more of these in the future or was that just a one off offer?
Dallas
-
19th October 2022, 05:30 PM #20GOLD MEMBER
- Join Date
- May 2011
- Location
- Albury
- Posts
- 3,039
I've still got plenty available Dallas, message me. I was very chuffed at the response to the offer though, a few members have already bought 18 pairs.
Cheers,
David
Similar Threads
-
Saw makers ????
By Simplicity in forum Saws- handmadeReplies: 33Last Post: 11th April 2015, 07:12 AM -
100 Toy Makers
By bj383ss in forum TOY MAKINGReplies: 4Last Post: 8th September 2011, 08:18 PM -
Box makers and pen makers
By Jedo_03 in forum BOX MAKINGReplies: 1Last Post: 9th November 2006, 10:52 PM