Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Vinyl wrap lifting
-
25th November 2008, 10:20 PM #1
Vinyl wrap lifting
Hi All
I bought a kitchen from a local business 3 years ago (flat pack). I didn't do the research as good as i should have. The cupboards and doors are chinese, one of the doors has started to lift off the panel. Not from the edge but in from the edge.
I went back to the company to discover they went bankrupt owing a lot of money. So i have had no luck with them.
Is there any way to repair this one door without replacing all of them. Can i get it to stick down again or get some glue under it, is there anything i can do.
I have been to other manufacturers and they cannot match the colour (its a gloss white).
I don't want to replace all the doors because of one dodgy door. The kitchen is fine apart from this one door.
Any ideas.
Colin
Read the full thread at RenovateForum.com...
-
25th November 2008 10:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many