Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Aluminium strip to MDF?
-
29th April 2011, 04:42 PM #1SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 534
Aluminium strip to MDF?
Hi guys,
Need to reattach a table edge. It's a 12mm wide (1.6mm thick) aluminium edge to an MDF top.
Liquid nails (or similar) would do the job, but it's too thick and there will be a small gap.
So what glue would be thin and work with those materials?
Scott
-
29th April 2011 04:42 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th April 2011, 05:41 PM #2SENIOR MEMBER
- Join Date
- Jul 2003
- Location
- Melbourne
- Age
- 53
- Posts
- 856
Hi Scott, for benchtops/laminates contact cement is normally the way to go.
Checkout:
Selleys Gel Grip
I am not recommending this particular glue, just recommending contact cement in general for your purpose.
good luck
Joez
-
29th April 2011, 07:01 PM #3
Hey Scott,
My first questions would be, Why did it come off?? was it the original Glue letting go?, did it get knocked ?? did the MDF get moisture on it and breakdown?? are there any screws involved,??
HazzaBIt's Hard to Kick Goals, When the Ba^$%##ds Keep moving the Goal Posts.
Check out my Website www.harrybutlerdesigns.com.au
-
29th April 2011, 08:02 PM #4SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 534
Thanks guys.
No screws and no moisture.
It has been moved around a bit and knocked about.
It's probably been attached for about 12 years.
-
30th April 2011, 10:06 AM #5GOLD MEMBER
- Join Date
- Apr 2011
- Location
- McBride BC Canada
- Posts
- 3,543
I'd scuff the glue face of the Al with maybe 400 grit to add a little fresh "tooth."
-
2nd May 2011, 11:14 AM #6SENIOR MEMBER
- Join Date
- Mar 2009
- Location
- Sydney
- Posts
- 534
I will. Thanks.
Similar Threads
-
Where can I get a brass strip?
By Fair Dink in forum BOAT BUILDING / REPAIRINGReplies: 5Last Post: 31st July 2008, 10:49 PM -
laminated strip box
By jow104 in forum WOODWORK PICSReplies: 3Last Post: 22nd July 2007, 05:23 PM -
ready strip
By pootle26 in forum FINISHINGReplies: 3Last Post: 30th August 2005, 05:36 PM