Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Which glue to use
-
27th August 2012, 01:09 PM #1Novice
- Join Date
- Jun 2012
- Location
- Mount druitt
- Posts
- 12
Which glue to use
G'day. All. I'am in the process of building a new workbench ,which is 3 metres long,1.5 metres wide ,cross braced at every 300 m/m by 70x50 sitting on each side on more 70x50 bolted to the sides which are 200x50 and standing on 100x100 legs,all second hand and well seasoned hard wood.the bench top will be 80x20 cypress tounge and grooved floorboards .what I would like to do is glue them down what i'am thinking is to run a glue into each grove as well as a good bead across the bearers, I reakon by doing this I should be able to stop vibrations and drumming sounds,I do not have floorcramps to squeeze them together but I should be able to use clamps to force them down into the bearers before I screw them down , .What would be the best type of glue use please?.
-
27th August 2012 01:09 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th August 2012, 01:39 PM #2
Hi John,
Welcome to the forumses.
I would suggest a glue which will hold wood to wood snugly.
But I don't understand why you don't screw them into the bearers so they can be replaced if necessary. Surely you don't get drumming and rattles with this arrangement?
Try Titebond II, should do the trick. $10.00 odd for 2 litres at Masters.
-
27th August 2012, 03:02 PM #3Novice
- Join Date
- Jun 2012
- Location
- Mount druitt
- Posts
- 12
Thank you LGS. I hadn't given any thought to replaceing any boards,that's why the forums are good to make you think outside of the square.again thank you again this time for turning my light on.
Similar Threads
-
UHU Super glue - Miracle glue or sham?
By Lignum in forum WOODWORK - GENERALReplies: 33Last Post: 17th May 2016, 10:42 AM -
Anyone Used a Glue Joint Bit for Table Top Glue-ups?
By TP1 in forum WOODWORK - GENERALReplies: 13Last Post: 25th March 2010, 11:28 PM -
Threaded rod glue into redgum knob - best glue?
By ian56 in forum GLUEReplies: 5Last Post: 21st January 2010, 03:47 PM -
glue or glue + dowell?
By Waldo in forum GLUEReplies: 5Last Post: 21st January 2007, 01:19 AM -
Glue pot for Hide Glue??? where is em???
By NewLou in forum GLUEReplies: 15Last Post: 7th April 2006, 09:31 AM