Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 30 of 30
Thread: What glue is it?
-
20th September 2005, 03:10 AM #16Originally Posted by Waldo
FWIW, I'm pretty sure it's available in smallish containers for domestic use and may be available thru Bunnings or Mitre10. The other 14xx CA's are only available in commercial quantities but 1431 would do ya.
PS: Did a search and came up with this, it might help ya:
http://www.bostikfindley.com.au/pdf/...1_adhesive.pdfLast edited by Skew ChiDAMN!!; 20th September 2005 at 03:10 AM. Reason: Add URL
- Andy Mc
-
20th September 2005 03:10 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
20th September 2005, 10:13 AM #17
G'day Skew ChiDAMN!,
Did a search and came up with the same PDF info, it's the right guy allright.
Thanks.
-
20th September 2005, 10:54 PM #18
G'day Waldo,
I'll see about grabbing some next week on the flip from the Isle. I should be back Wednesday night [fingers Xed] so I'll PM you then.
Made a start on the laundry cupboards yet?
- Andy Mc
-
20th September 2005, 11:03 PM #19
G'day Skew ChiDAMN!,
Shhhh, not so loud my wife will be asking next.
Hey thanks on the glue, I can hold off for a bit - have to sand some stuff down but I can do other things while I wait - was going to find a 1L tin. Still waiting on the Pontiac for you.
-
21st September 2005, 10:23 AM #20
Howabout the glue they use to glue emeries on shearing grinders?
It doesn't go stiff like most glues, and actaully peels off really easy when the time comes to replace the paper.Boring signature time again!
-
21st September 2005, 10:26 AM #21
-
21st September 2005, 10:43 AM #22
The two bests ones are
Sunbeam shearers adhesive
and
Heineger dunno but like shearers advesive.
You'll need to find a rural supplies outlet, which may be tricky for you if you live in the middle of Melbourne.
Costs about $15.00, lemme know if ya wanna some I can get it easy peasy and send it to ya.Boring signature time again!
-
21st September 2005, 11:04 AM #23Senior Member
- Join Date
- Jan 2005
- Location
- Como NSW
- Age
- 58
- Posts
- 243
As well as for repairability, hide glue is used in instruments because it has low creep. PVA and other types of glue will move a little over time (creep) if subjected to continuous force like string tension. Hide glue doesn't move til you heat it or steam it.
-
1st October 2005, 09:33 AM #24
G'day,
Well I've looked around, although I haven't driven too far or wide on account of the price of petrol.
I can't find Bostik 1431 but what I have found is some stuff called Parifix Fast Grip, Sellys also have a similar product. It sounds like it works in the same manner as 1431, does anyone know if it does work the same way, ie. tacky, semi permanent and doesn't fully dry?
Need to get my face plate sander back intio action.
Thanks.
-
2nd October 2005, 02:29 AM #25
Sorry 'bout the delay mate, but the bloke ran out. I'll bring home my jar this week, I think it should still be usable.
Provided I remember...
- Andy Mc
-
2nd October 2005, 11:05 AM #26
G'day Skew ChiDAMN!,
See my post in reply to yours about my shed.
-
5th October 2005, 01:12 PM #27New Member
- Join Date
- Sep 2005
- Location
- Sydney, Australia
- Posts
- 5
G'day Waldo. I have been doing a bit of research on glues lately for my own knowledge and have come across some things that might help you. The parfix fast grip or the equivalent Selleys contact adhesives do not remain permanently tacky, they do set hard. I came across a glue by Franklin (titebond) that sounds like the one you are after. The description on the website is copied in below:
"Sand Disc Cement - TITSD-0237
Franklin Sanding Disc Cement is a pressure-sensitive formulation created specifically for bonding sanding discs to either rubber or metal plates. It creates a very strong bond after brief drying, yet remains permanently "sticky," allowing the disc to be peeled off easily when worn out"
The web address is http://www.timbecon.com.au/products/...ves-371_0.aspx
Hope this helps in some way.
Alex.
-
5th October 2005, 01:17 PM #28
G'day Alex Ds,
Thanks for the info, especially on the Parfix, I had bought thinking it was similar but kept the reciept in case - which I will now take back.
Thanks too on the link for "Sand Disc Cement - TITSD-0237.
-
5th October 2005, 08:20 PM #29
The stuff I was talking about dries and ends up like latex, all rubbery soughta. SHuck loads cheaper than the timbecon gear too.
Boring signature time again!
-
5th October 2005, 09:16 PM #30
G'day Outback,
Yeah I remember the stuff you posted, I was more of acknowledging Alex Ds' post.
Similar Threads
-
Are Your Glue Joints Repairable?
By Bob Smalser in forum GLUEReplies: 8Last Post: 16th December 2005, 10:45 AM -
Gluing wood for turning
By R12chard in forum WOODTURNING - GENERALReplies: 3Last Post: 10th April 2005, 05:51 AM -
What glue should I use?
By chook in forum GLUEReplies: 3Last Post: 12th November 2004, 07:51 PM -
nasty glue line
By digger in forum GLUEReplies: 4Last Post: 8th January 2004, 03:28 PM -
Hide Glue Q & A
By ubeaut in forum GLUEReplies: 1Last Post: 12th November 1999, 03:01 AM