Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 32
Thread: Best glue to fix cricket bat
-
29th June 2005, 12:07 PM #1
Best glue to fix cricket bat
Another stupid question for the collective wisdom.
I broke my cricket bat last week. The splice where handle is glued into blade has come free. It looks fairly undamaged and I think I can glue back into place.
What is the best glue? It needs to withstand the shock (when I occasionally actually manage to hit the ball) and I guess be compatible with the original glue used, as part of the splice is still firmly attached?
To get fixed professionally is around $50 and two trips to Parramatta. I'm sure I can do the job
Thanks
-
29th June 2005 12:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th June 2005, 12:21 PM #2
Depends on what it was originally glued with. Some can be reglued and others require a freshly-jointed surface.
What does the residue look like? Dark brown crystals? Yellow plastic? White plastic? Hard red resin? Clear resin?
See my post below on glue repairability.
-
29th June 2005, 12:34 PM #3
Thanks Bob.
From memory the glue was not apparent hence I assume it was transparent. I will check when I get home.
Read your meticulous thread, very informative, well done. Lacking further advice it would appear that the West Epoxy is the best and safest bet.
Jon
-
29th June 2005, 12:55 PM #4
Actually, given the beating the stick takes, the best choice if possible is to joint the surfaces to fresh wood and reglue using epoxy or resorcinol.
-
29th June 2005, 02:21 PM #5
Hi Bodgy
My immediate impulse was to say West Systems epoxy, with which I have had a lot of experience over the years repairing custom windsurfers. But then I reminded myself that the cricket bat handle joint and design is over 100 years old, and I'm sure epoxy was not used in the original construction. Will epoxy withstand the shock and need-to-flex of the V-joint that connects the handle to the blade when bat meets ball. I have repaired a few cricket bats in the past that had this type of separation, but these were my young son's, and I very much doubt that they had to withstand the type of stresses yours will need to withstand. In any event, I just used yellow glue on those occasions, and that worked well (no come back problems).
Should the ideal glue must be capable of a small degree of flex, or should it be perfectly rigid? I hope that this does not confuse matters.
Regards from Perth
DerekLast edited by derekcohen; 29th June 2005 at 04:40 PM.
-
29th June 2005, 04:31 PM #6
Derek, thanks
I believe the join should be completely rigid. Bat handles are laminated (cane?)with layers of (I think) rubber, and the blade is English willow. Plenty of give there. The constant shock is the issue. I use this bat in practice, an hour a week in front of a manic bowling machine, plus the game on the weekend, where (sadly) the duration of use is often shorter.
I will try the Epoxy. If it fails there's always the $50 professional service, and I have a few others in the kit.
In fact, maybe I should get a new one - its just like buyng tools!
Jon
-
10th July 2005, 03:56 PM #7
PVA seems to work on cricket bat.
Went out to buy West epoxy glue or any epoxy for that matter. Not available in local shops inc Bunnies, they offered Araldite. So used a good quality PVA to glue up the half the splice that had split out from the body of the bat. Clean split, smothered in glue and clamped up. Put near fire for a couple of days (it was damp and raining). All seemed fine, played yesterday and it was as good as ever. Unfortunately I was not, so have yet to test for longevity
Since got the glue over the net ex Perth.
Bodgy
-
10th July 2005, 03:56 PM #8
PVA seems to work on cricket bat.
Went out to buy West epoxy glue or any epoxy for that matter. Not available in local shops inc Bunnies, they offered Araldite. So used a good quality PVA to glue up the half the splice that had split out from the body of the bat. Clean split, smothered in glue and clamped up. Put near fire for a couple of days (it was damp and raining). All seemed fine, played yesterday and it was as good as ever. Unfortunately I was not, so have yet to test for longevity
Since got the glue over the net ex Perth.
Bodgy
-
10th July 2005, 05:43 PM #9Originally Posted by Bodgy
Depends who are batting against. You will need Gorilla glue this yearwoody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
10th July 2005, 07:52 PM #10
Two swallows and a vulture do not a summer make
Woody, I love a sense of humour. If I was in the UK I could have have used flour paste, oh, except for the weather I guess.
Bodgy
-
10th July 2005, 08:04 PM #11Originally Posted by Bodgy
WE SHALL SEEwoody U.K.
"Common looking people are the best in the world: that is the reason the Lord makes so many of them." ~ Abraham Lincoln
-
10th July 2005, 09:15 PM #12
We shall, but the Tests are the thing.
I think we are hijacking the forum, perhaps we need to phrase things in terms of the resilience of the willow vis a vis Tasmanian Stringy Bark!
Final word: if you're watching - Trescothick and Strauss don't seem to be proficient enough to get an edge - 4th over.
Anyway, yr wikkie comes from Toowoomba and Pieterson from Durban!
You have right of reply, before the thread gets yanked.
Bodgy
-
10th July 2005, 09:48 PM #13Originally Posted by Bodgy
It's a rare thread on this BB that doesn't get highjacked at some point in its life.
Poms are 3 fa at the mo.
-
10th July 2005, 09:52 PM #14
-
11th July 2005, 12:12 AM #15
Cricket bat repair
Hi Normally I wouldn't answer a thread such as this, as I know bugger all about cricket and bats.
However I happened on a cricket bat repair site this morning while, looking for vellum to wrap around a knife handle (long story, too long for here ).
The gist of the info is that you can use super glue or PVC. Two pack is a Big NO NO as it does flex as well as the others glues Try google and stick cricket bat repair in the browser.
Best of luck chaps
GrahameLast edited by Grahame Collins; 11th July 2005 at 12:14 AM. Reason: punctuation error
Similar Threads
-
Making cricket bats?
By aobed in forum WOODWORK - GENERALReplies: 38Last Post: 8th January 2010, 10:04 PM -
Are Your Glue Joints Repairable?
By Bob Smalser in forum GLUEReplies: 8Last Post: 16th December 2005, 10:45 AM -
Glue me up...
By Zed in forum GLUEReplies: 3Last Post: 16th February 2004, 04:49 PM -
Glue Lines On Table Top
By Scottb in forum GLUEReplies: 2Last Post: 9th January 2001, 06:30 PM -
Hide Glue Q & A
By ubeaut in forum GLUEReplies: 1Last Post: 12th November 1999, 03:01 AM