Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
29th June 2002, 12:57 AM #1Novice
- Join Date
- Jan 2001
- Location
- Melbourne, Australia
- Posts
- 17
What glue to use with Japanese Veneer?
I was down at G Fethers & Co in Melbourne today and have sourced some veneer from them which is a little different to the usual pre-glued stuff I get from Consolidated Edgings.
This is a very thin (0.2mm) veneer on a paper backing made in Japan. They guarantee no shrinkage, it is extremely flexible and then finish quality is excellent.
Q: What is the appropriate glue to use on a paper backed veneer like this onto MDF?
Thanks,
Marcus
-
29th June 2002 12:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
30th June 2002, 06:44 PM #2Novice
- Join Date
- Jan 2001
- Location
- Melbourne, Australia
- Posts
- 17
OK, the veneer is called "SanPly-4" and is made by a company called Hoksan. It seems pretty common in the US but not so here.
So far I have seen advice to use contact adhesive or PVA. Given that I want my clients to be able to apply this with a minimum of tools or accessories would the PVA be OK?
Marcus