Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
-
25th November 2020, 09:21 PM #1New Member
- Join Date
- Jul 2010
- Location
- Norway
- Posts
- 2
AliExpress router table insert (with DIY lift)
Hi all!
First post, been lurking for years (literally), so please bear with me )
I've purchased a router table insert plate from AliExpress. Cheap, I guess (like $25), and it seems like a sturdy product after first inspection upon arrival.
Downside is that the router bit "insert" circles, they're plastic, and the whole shebang came without any kind of instructions.
The install of the insert itself I've got figured, but does anybody have any ideas on how to utilize the "DIY lift kit" that came with the insert?
My router is an ELU OF97E (DeWalt DW622K), I'm sure I need to make some sort of modification to use the lifting kit. Suggestions?
I'll also need to drill a hole for the threaded rod into the insert plate. Should I add a bearing underneath the plate?
I imagine drilling a hole in the plate to sink the head of the rod below the insert surface, adding a wooden "bearing holder" under the plate.
IMG_7348.jpg
Elu-OF97E-Router-1100-Watt-Good-condition.jpg
Any suggestions, tips and tricks are most welcome )
--
-Tom
-
25th November 2020 09:21 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th November 2020, 09:36 AM #2GOLD MEMBER
- Join Date
- Apr 2019
- Location
- NSW
- Age
- 38
- Posts
- 1,132
keen to see how all this goes, i've seen these router plates advertised around and wouldn't mind trying to install one into my cast iron top.
-
26th November 2020, 09:19 PM #3
Similar Threads
-
SOLD: Router Lift, Lge C/Iron Table, H/D Stand on Wheels, Triton Router + Loads Router Bits
By aarggh in forum WOODWORK - Tools & MachineryReplies: 16Last Post: 7th November 2020, 02:27 PM -
VICTORIA Festool CMS table + router insert + ts75 insert + extensions
By Sapherion in forum WOODWORK - Tools & MachineryReplies: 1Last Post: 11th June 2020, 03:53 PM -
WEST AUST Cast iron router table top and Sherwood router lift
By bueller in forum WOODWORK - Tools & MachineryReplies: 11Last Post: 15th March 2020, 05:02 PM -
VICTORIA Carbatec heavy duty router table plus Hitachi Tr12 with router lift.
By Harmek in forum WOODWORK - Tools & MachineryReplies: 0Last Post: 20th June 2018, 03:48 PM -
Help Choosing A Router Lift For The New Router Table
By RoyG in forum ROUTING FORUMReplies: 26Last Post: 2nd May 2017, 11:55 AM