Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5

Thread: On a budget?

  1. #1
    Join Date
    Sep 2004
    Location
    Hill End Victoria
    Posts
    24

    Question On a budget?

    I know some of you will cringe at this.......
    I am in the market for a router table and I found this on ebay.
    http://cgi.ebay.com.au/ws/eBayISAPI....sPageName=WDVW

    At $225 it is a bargin. I know you get what you pay for but is this machine really that bad?
    Does anyone have any experience with this machine?
    I realise it is light weight and maybe a bit small but it could always be fixed to a bench(I have the space) and have the table extended.

    All comments welcome (even the dont buy GMC it's crap!!!)

    Thank you all.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Oct 2004
    Location
    Melbourne, Australia.
    Posts
    1,273

    Default

    Peter, I have no qualms about GMC equipment. All of the GMC equipment I have is excellent value for money and all of my bits and pieces keep on working very well.

    That said I would be hesitant about just how they send that through Australia Post for $13.45, because basically you cannot do that item for that amount of money. I send quite a few items through the post and have a rough idea of what things cost.

    So the question is, where do they recover their money. Well I pondered this question some time ago when I was looking at purchasing a bench grinder and bench grinder stand. I looked at this same company on Ebay and yep, they had what I wanted. I then checked out the local GMC stocked hardware, not a Bunnings one by the way, I realised that there was a reasonable amount of difference in the Ebay price and the local hardware.

    On Ebay I could source a new Bench Grinder stand for $85.00 plus a freight charge of $18.30 a total of $103.30

    The going rate after looking for a fair bit of time is around the $75.00 for this item.

    My local hardware had it on special for $57.00, needless to say I grabbed it.

    The item I'm talking about is here on Ebay.

    http://cgi.ebay.com.au/ws/eBayISAPI....51979&tc=photo

    If that link doesn't work this is the item number 4340651979

    I would suggest that the router set-up you are considering, would more than likely be cheaper at a local hardware and the bonus is that you can see and feel the item, then if you're satisfied, take one home.

    Mick.

  4. #3
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    Peter, I agree with Mick that GMC stuff is reasonable value for money.
    I seem to recall this router table has been discussed in these forums, I hope someone can direct you to the thread.
    I also agree with Mick that you may get it cheaper elsewhere.
    But like you I live in the sticks and beggars can't be choosers.
    If you are comfortable with the cost go for it.
    Regards, Bob Thomas

    www.wombatsawmill.com

  5. #4
    Join Date
    Sep 2004
    Location
    Hill End Victoria
    Posts
    24

    Default

    thanks fella's, I though I had seen it in Bunnies in the past so I would certainly go there first to check it out.

  6. #5
    Join Date
    Aug 2004
    Location
    Pearcedale Vic.
    Age
    62
    Posts
    50

    Default

    For anyone interested there is a factory in Adrian Rd Campbellfield

    which sells GMC seconds and repairs.

    very very cheap!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •