Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Buying advice please
-
26th October 2011, 04:38 PM #1Senior Member
- Join Date
- Dec 2010
- Location
- Moss Vale
- Posts
- 379
Buying advice please
I would like some suggestions please.
I have purchased a Kreg Router Table and thought I could fit my (almost brand new) AEG RT1350E Router to it. That was until I discovered that it had a (stupid) "safety lock" system so the router can not be made to run without a finger on the power trigger.
So much for the AEG destructions that state that the machine can be used on a router table..... well I guess it can if you are a three handed contortionist with long arms.
So, I need to buy a new router. It must be able to be locked in the on position so I can use it on the table.
One feature I really liked about the AEG was the Depth Stop System that made depth cutting adjustments very easy. I would like to get something that is as easy to use in the new one if possible.
With some more time and experience I hope to be good enough to be called an amateur weekend worrier with delusions of adequacy, but I am not that good yet. So, I don't want to spend a fortune on some deluxe model that does everything except powdering your bum, but I also don't expect to get an el cheapo that is guaranteed to blow up the day after the three month warranty expires.
Suggestions please.
-
26th October 2011 04:38 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
26th October 2011, 05:42 PM #2
Could you zip tie the trigger in the on position & plug the router to an inline switch that you use for on/off?
-
26th October 2011, 06:00 PM #3Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 1,007
I very much doubt that you will be able to buy a router that does not have the same sort of trigger lock.
It's the nanny state, you know.
-
26th October 2011, 07:44 PM #4
The Tritons have a locking ON/OFF switch, and my old Mak has a heavy duty toggle switch.
However, I agree with Snapman that it is viable to lock the switch in the ON position with a cable tie or velcro wrap ( double sided strip of velcro, hooks one side, loops other, sticks to itself but seperates when you want), and control the router from a remote switch conveniently located on the table frame. Triton supplied such a switch for their saw and router tables, and it appears that it is still available as a spare part. Alternatively, you could have a normal power point in a sealed housing fed by an extension cord.
At worst, you might loose access to the soft start function, but this should not be an issue for a solidly set up table machine.
-
26th October 2011, 08:42 PM #5Senior Member
- Join Date
- Dec 2010
- Location
- Moss Vale
- Posts
- 379
Thanks for the suggestions.
A couple of points. Firstly, there are some routers available that do have the locking on switch. Ozito have them and I understand so do some models of Hitachi.
Secondly, whilst I fully concur with the comments on the 'nanny state' if this is reason then it just does not make any damn sense at all!
My table saw can be locked on, so can my circular saw and my jig saw. These have got to be in the same danger category as a router. Also, how come some brands brands have the safety feature and some don't. No logic in it at all.
-
26th October 2011, 09:29 PM #6Retro Phrenologist
- Join Date
- Oct 2009
- Location
- Springfield NSW
- Age
- 70
- Posts
- 1,007
Hey TORB, I wasn't trying to start an argument.
I still think that you will find it difficult to find a router, or any other power tool, for sale in Australia that does not have some form of lockout on the power switch. I would guess that the switch on your table saw (if it is less than about 10 years old), has some sort of cover over it that you have to lift before you can turn it on. Every power tool that I have seen in recent years has some sort of two step lockout device to prevent accidental turn on.
Even self propelled lawn mowers have had "dead mans handles" for some years now.
I know that my table saw, bandsaw, mitre saw, lathe, circular saw (x2), jigsaw, router (x2), and even my hedgetrimmer all have some sort of two step lockout. My drill press and jointer don't , but they are both over 50 years old
I think many of these devices are unneccessary and can even be a bit silly, but that is the way things are. You don't have to like it, you just have to live with it.
Things may even get more complicated and expensive in the future. Check out the threads here about table saws in the USA and the "saw stop" device.
I know that the router under my table has a suitably positioned cable tie to overcome the two step lockout.
If you know of a new router for sale that does not have a lockout feature, then go buy it and be happy.
-
27th October 2011, 05:07 AM #7Senior Member
- Join Date
- Dec 2010
- Location
- Moss Vale
- Posts
- 379
Avery,
No worries; I didn't think you were trying to start an argument.
I agree with your comments about the two step lock out..... sort of. And even two stage start mechanisms also make sense to stop machines being accidentally turned on by Darwin Award contenders.
Here is an 'interesting' one. My Dewalt Table Saw (latest model) has a red cover over the on and off switch but its default setting is spring loaded to the uncover the switches. When I read the destructions that came with it, I am pretty sure it said that it was for a quick emergency shut down, which makes sense as the two switches are exposed, making it easy to turn on.
Also, whilst safety features that stop accidental power up may be a good idea, many power tools still have the ability to be locked in the on position once they are started. My circular saw, jig saw etc all allow the power to be locked on. And that's what I would like in a router.
My (new) research shows there are a few available but they are all about $400+, which is not a show stopper, although I would like to keep it under $500.
-
27th October 2011, 12:41 PM #8Senior Member
- Join Date
- Dec 2010
- Location
- Moss Vale
- Posts
- 379
Decided on a Dewalt DW621 as it will do all I want to do and should last the distance. Also, I found Dewalt had fantastic customer service when my newly purchased table saw had a problem, and that's always a big consideration for me.
-
19th January 2012, 06:37 PM #9
Hi Torb,
I noticed you have the Kreg router table.
Does it have a metric rule on the fence?
I am looking to purchase the table from the US but they only supply an imperial scale.
Cheers, Jack"There is no dark side of the moon really. Matter of fact it's all dark."
-
20th January 2012, 04:42 AM #10Senior Member
- Join Date
- Dec 2010
- Location
- Moss Vale
- Posts
- 379
-
20th January 2012, 08:44 AM #11
Thanks Torbs, I'll see if I can find someone selling the replacement tapes.
"There is no dark side of the moon really. Matter of fact it's all dark."
Similar Threads
-
Advice on buying my first router.
By Mychael in forum ROUTING FORUMReplies: 40Last Post: 25th July 2011, 08:59 AM -
Advice on Buying (what to look for)
By Utey in forum BOAT BUILDING / REPAIRINGReplies: 3Last Post: 13th June 2009, 03:57 PM -
Bandsaw buying advice
By ecoarena in forum BANDSAWSReplies: 8Last Post: 13th September 2007, 05:45 PM -
Sym 70 buying advice
By snap in forum FESTOOL FORUMReplies: 2Last Post: 17th October 2006, 05:35 AM -
Advice on buying my first router
By James Woods in forum ROUTING FORUMReplies: 20Last Post: 19th July 2004, 03:38 PM