Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Cope & Stick router bits
-
10th March 2013, 09:40 PM #1Novice
- Join Date
- May 2012
- Location
- Australia
- Posts
- 13
Cope & Stick router bits
Looking for info re router bits for cope and stick joinery for a modern looking solid timber door with translucent insert panels. The trim moulding to hold glass are 13mm so the stick profile would need to be about the same.
Cheers
-
10th March 2013 09:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
10th March 2013, 11:28 PM #2
I haven't heard cope/stick since I left the states. Here, I'm more used to scribe/ counter scribe and stick moulding is struck moulding. Sorry, just spindle nerdery.
Cheers, Bill
-
10th March 2013, 11:49 PM #3Novice
- Join Date
- May 2012
- Location
- Australia
- Posts
- 13
Not sure about the correct lingo as I have never made timber doors before. Most of the info I have looked at comes from the USA and refers to cope and stick
-
11th March 2013, 06:53 AM #4
Trend do a version and as there website has an Aus page I've attached the link;
Trend Search ResultsDragonfly
No-one suspects the dragonfly!
-
11th March 2013, 10:16 AM #5Novice
- Join Date
- May 2012
- Location
- Australia
- Posts
- 13
Thanks but..... the application is for 45mm(1 3/4") thick entry doors. the router bit suggested wont route timber that thick.
-
11th March 2013, 10:49 AM #6
If you have a scribing gouge you can do it by hand. A 1/4 round or oval mould is easiest. For glass doors rebate everything except the mould. Mitre the rail mould, that is the scribe profile, pare to the profile and you are scribed. You will also need to remove the stile mould the length of the non-moulded width of the rail to close the joint.
Look for an online tute. I couldn't find one but one must be there.Cheers, Bill
-
11th March 2013, 11:10 PM #7Novice
- Join Date
- May 2012
- Location
- Australia
- Posts
- 13
online tute?
-
12th March 2013, 12:51 AM #8
Online tutorial. With all the renewed interest in hand work there must be something online. Scribing gouges can be found at the fleas.
Western scribing gouges are slightly different. This is just to show the bevel on the inside.
5/8" Scribing Gouge - Iyoroi - The Japan Woodworker CatalogCheers, Bill
Similar Threads
-
FESTOOL query #6 – Router Bits and OF 2200 Router Table
By FenceFurniture in forum FESTOOL FORUMReplies: 2Last Post: 12th February 2011, 07:37 AM -
How do you cope?
By artme in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 0Last Post: 8th December 2009, 10:25 PM -
Compound Curve Cope and Stick Router Techniques
By NewLou in forum ROUTING FORUMReplies: 0Last Post: 1st July 2005, 11:36 AM