fence designs

**gingerbeer86** · 29th January 2012, 02:35 PM

I am making a bench and have set a kreg router insert into the bench and now need to make a fence. I want to have a split fence and was going to get some c channel and rout it into the bench top and with some t -bolts to attach the fence. I am sure there must be some clever ideas that could help avoid some pitfalls. I would run the fence across the bench from front to back (750mm) and work the router from the end of the bench. Any advice welcome. Attached is a picture of the set up.

**Bob38S** · 2nd February 2012, 12:20 PM

If it helps - go for it - homemade quite a while ago now but still working well.

https://www.woodworkforums.com/f20/no-knobs-fence-38731/

**munruben** · 2nd February 2012, 12:47 PM

Home made router fence can be as simple or as complicated as you want it to be, me? I like simple. I know one particular guy who uses a router and his work is faultless and his router fence consists of a straight piece of timber clamped to the router table top.
Sometimes its the singer and not the song.

**gingerbeer86** · 4th February 2012, 10:23 PM

Thanks Bob, some neat design ideas there. I will wander down to Kunda park and check out the aluminium extrusions and grab some angle and channel. I like the idea of cuphead bolts and sockets. The connection to the dusty is something I had not put much thought into and I think your solution looks good and should collect well.
cheers

Thread: fence designs

Thread Tools

Search Thread

fence designs

Similar Threads

Looking for some aussie designs

Incra Original Jig Fence or Woodpeckers LE Fence - which one for newbie?

Re-using designs

Toy box designs and plans?

Tags for this Thread

Posting Permissions