Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 26
Thread: Horizontal router table
-
9th December 2008, 01:37 AM #1
Horizontal router table
Is any one aware of the availablity of a table holding the router horizontally in Australia?
I've been looking at one on an American site and think it would suit me, wonderfully. If you are iinterested in viewing I'll find the URL and post here later.
soth
-
9th December 2008 01:37 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
9th December 2008, 01:45 AM #2
Decided to post now before I forget where it is:
http://www.mlcswoodworking.com/shops...z_video_anchor
soth
-
9th December 2008, 07:49 AM #3
I saw that set-up recently too and am thinking about buying one. It appeals to me because I could mount and de-mount the router without having to bend down (although a hinged table top would provide similar access I suppose).
Why not buy directly from the US? It would probably work out cheaper (including shipping) than if you were to buy from an Australian retailer (assuming one even exists for this product)..
I know you believe you understand what you think I wrote, but I'm not sure you realize that what you just read is not what I meant.
Regards, Woodwould.
-
9th December 2008, 08:15 AM #4
horizontal router table
I made one of these some years ago from a gadget I picked up at a garage sale. I found out that it came off a table saw bench with a router attachment. It has x y z capability. The router is simply screwed to the fixed upright board and the bench is multi directional.. The knob below raises or lowers the bench, two levers front and right adjust x and y. Very very handy for small jobs as wood can be clamped to the bench and manipulated by the levers.
-
9th December 2008, 08:56 AM #5Still learning ..
- Join Date
- Jul 2005
- Location
- Melbourne
- Posts
- 91
Soth,
This is the sketchup file of one I made a while back. The router is an old GMC from a 'difficult' router table I had and the y axis is handled by a winder mechanism. The difficult part is the x-y movement of the table I used hardwood runners in dovetail channels but will, at some point, want to look at this again. I have successfully used it to cut mortices for floating M&T joints but not much else yet. I will post some pics from the shed later.
Regards
https://www.woodworkforums.com/attach...9&d=1214457787
-
9th December 2008, 09:28 AM #6
On my first conventional router table I added a vertical mounting plate for using these 'tall' bits. This allows the use of your normal under table dust extraction.
My vertical plate pivots on one side, the other has a height adjuster and clamp. Easier than the method illustrated.
Since the work passes over the bit, most of the dust is collected in the table. For slotting operations of course this is not true, so I'd consider making the vertical mounting big enough to fix a box over the router with an extraction port.
Greg
-
9th December 2008, 10:55 AM #7
Thanks all for the comments (isn't this a great BB).
Woodwould, I looked at the priciing and the all-up cost would be a bit less than US$345 - I always give Aussie suppliers the first go.
soth
ps: If I do buy this table I'd install a dedicated router and leave my "plungy" for hand ops.
-
9th December 2008, 11:04 AM #8
I've got a plan for one here somewhere. It's made from ply and a few wing nuts and some all thread. Not difficult to make I wouldn't think, although I've yet to make one myself. It's on the list.
"I don't practice what I preach because I'm not the kind of person I'm preaching to."
-
10th December 2008, 03:03 AM #9
-
10th December 2008, 05:12 AM #10Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
Some good ideas there Soth. My Uncle made what he calls "The Ultimate Router Table"It can be used Horizontaly, vertically and at 45 degrees.
Beautiful unit. Works a treat.
-
10th December 2008, 06:25 PM #11
How about some pics/plans Artme ?
"There is no dark side of the moon really. Matter of fact it's all dark."
-
10th December 2008, 06:52 PM #12SENIOR MEMBER
- Join Date
- Jul 2008
- Location
- Meadow Springs, WA
- Age
- 76
- Posts
- 574
There's a project for The Ultimate Router table in a recent shopnots, I'm basing mine off it. I don't recall its dimensions, I think it's fairly large.
Mine's about 1200x600 (size of MDF),
It has an insert, I placed mine on centre left to right, about 200 from back.
It has a mitre channel across the front, about 75 in.
The project has provision for dust extraction, I've not made a decision there.
The project has two strips of mini-T to support the fence. They are fairly close together (possibly connected with the fence design and dust extraction).. Another, similar sized table I've seen has the T near the ends.
Another commercial tables has slots in the fence (at right angle to face) and bolts to table. I might just use clamps.
I'm making two fences for starters, one 100x100 and another 250 high with a bevelled edge to hang jigs off.
It will sit on a cabinet to be decided, but probably similar to the project's.
-
10th December 2008, 10:00 PM #13Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
marvelous table
Jack: Will need to wait until I get back to Oz and then contact Mon Onc. After Chrissy.
Sorry can't do better than that.
-
10th December 2008, 10:02 PM #14
No worries
"There is no dark side of the moon really. Matter of fact it's all dark."
-
12th December 2008, 08:50 AM #15SENIOR MEMBER
- Join Date
- Apr 2006
- Location
- Melbourne Victoria
- Posts
- 621
I had a play with Mike the Pom's sketchup (Im not too good with it) with some idea I had
If the router mounting plate was hinged, it would allow the router bit to enter at angles, giving more options.Cutting one side of a cheap routers base palte to form a "D" shape would allow it to still be close to the fence
Similar Threads
-
What is a good router table/router table accessories?
By SilverSniper in forum ROUTING FORUMReplies: 22Last Post: 4th March 2009, 10:05 AM -
Horizontal router
By MikeThePom in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 1Last Post: 27th June 2008, 12:07 AM -
Plan for horizontal router table?
By hi ho sliver in forum ROUTING FORUMReplies: 7Last Post: 9th August 2007, 01:59 AM -
Attching Triton Router to an Vermont American Industrial Router Table
By johanf in forum TRITON / GMCReplies: 4Last Post: 6th June 2005, 11:14 AM -
Horizontal Router Table
By DPB in forum ROUTING FORUMReplies: 12Last Post: 26th May 2005, 10:09 PM