Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 20 of 20
Thread: jewllery boxes/tools?
-
24th January 2006, 09:57 AM #16Novice
- Join Date
- Dec 2005
- Location
- Melbourne
- Posts
- 24
my reasons
I have long had an interest in woodwork(and just want a hobby as i have the time because i dont work due to a back and neck injury),but never had anywhere to do it as the old 10x10 shed down the back was too small, and recently i got a new garage built so now have the room to move, i thought of boxes in particular because they would not take up much room and are not heavy and thought i wouldnt need to spend too much on tools,but as others have pointed out i should realy have a thicknesser,which is a problem because of the noise problem,(not a $$ problem)i have thought of just finding a cabinet maker who would thin small batches for me from time time to get around that noise problem.
So i am slowly building up the basic tools i would need,router,dovetail jig,mitre saw,tenon saw,,,i already have a drill press, some chisels,hand planes power saw ect, and intend to build my own router table, and other benches as needed over time.
In the meantime have been borrowing books from the library to get ideas on how i should equip the new workshop.
-
24th January 2006 09:57 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
24th January 2006, 10:02 AM #17Novice
- Join Date
- Dec 2005
- Location
- Melbourne
- Posts
- 24
offers
and thanks to the guys who have offered to show me thier
workshop set ups, i am interested but the weekends are always
busy, as i have to drive my wife around to all the garage sales,
sunday markets and to do the shopping,she is bargain mad,does
very well i must admit.
About the only time i could visit you guys is if you take a sickie
during the week
-
24th January 2006, 11:13 AM #18
Sunday markets! Perfect! Heaps of opportunity to bargain hunt yourself for old plaens, chisels, saws, spokeshaves and the like.
On the machinery side, if you're sticking to small boxes, then Timbecon and Carbatec have benchtop jointers for a $2-300 dollars. That'd do you fine for a jointer I reckon.
And try to set up to resaw (on a bandsaw), rather than machine your stock thinner. You'll be wasting 1/2 of it!Cheers,
Adam
------------------------------------------
I can cure you of your Sinistrophobia
-
9th February 2006, 10:38 PM #19
Setup a cheap shop
Hi Redd,
Having aquired a triton MK# workbench 12 years ago it has been the work horse of my little shop at home.
you can pick up second hand ones in trading post all the time,no need to buy new,then add a second hand router,try the cash converters,ask them to let you plug it in (without bit) if it spins quiet then it could be a nice cheap start,
as for dovetail jig i also have a gifkins,and its a little wonder,(not as versatile as my Leigh,but great for making small jewlery boxes,ans the gifkins is precise,
hope this helps
kind regards A192K
-
1st March 2006, 11:14 AM #20Template Tom
- Join Date
- Apr 2003
- Location
- Perth Western Australia
- Age
- 90
- Posts
- 784
Originally Posted by redd11
TomLearn new Routing skills with the use of the template guides
Log on to You Tube for a collection of videos 'Routing with Tom O'Donnell'