Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: Left-field router option?
-
27th April 2019, 07:02 PM #1Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
Left-field router option?
My old hitachi M12V is on its last legs. I bought it cheaply and well used several years ago, and it now only goes when all the stars align and following several minutes of wiggling the speed controller and swearing.
I mainly use it in a table, or on a sled for flattening boards (using bigger diameter bits for the latter), and have never used it for plunge cuts. It's a pain to adjust depth on the table, and I like the accuracy I can achieve with my ancient 1/4" skil fixed base router. So ideally, I would like a 1/2" variable speed fixed base router with some fine adjustment capabilities. Which doesn't seem to exist here. The second hand market is pretty grim, mainly single speed plunge makitas and hitachi, usually in pretty poor condition.
However, I found this on aliexpress: https://www.aliexpress.com/item/Fixe...604317652.html
It seems to tick all of the boxes for what I want, without any of the compromises I'd need to make buying what's on offer here. I did a bit of research on the brand, and it seems to be built for the south east Asian industrial/professional market by a large OEM (which makes Skil and apparently some product for the big brands).
Is this a bonkers idea? Anyone think I should take a punt?
-
27th April 2019 07:02 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
27th April 2019, 08:04 PM #2GOLD MEMBER
- Join Date
- Nov 2018
- Location
- Newcastle
- Posts
- 1,018
Reckon you should have a punt... mainly so the rest of us know if it's any good
Not too pricey - Around AU$300 landed, and the reviews seem reasonably positive (although the 2nd one doesn't have very good english for a yank... which is a little sus!)
-
28th April 2019, 03:55 PM #3Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
I know the seller's good. I bought a baseplate and set of template guides off them, and was impressed with the quality of those.
-
7th May 2019, 09:12 AM #4Intermediate Member
- Join Date
- Oct 2005
- Location
- Sydney
- Posts
- 49
Another Option
I notice that there's also another router at https://www.aliexpress.com/item/1800...3-c22c1ceee318.
It's cheaper than the other one and more powerful too -- more in line with your old Hitachi.
I wonder if anyone here has bought one.
-
10th May 2019, 09:17 AM #5Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
-
10th May 2019, 10:04 AM #6Intermediate Member
- Join Date
- Oct 2005
- Location
- Sydney
- Posts
- 49
Thanks...will wait for your verdict.
-
20th May 2019, 07:48 PM #7Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
Well, the router (the Devon one in the original post) turned up today, and first impressions are that my gamble has paid off.
Fit and finish is excellent, and everything fits together precisely and accurately. It's solidly built with thick, quality plastics and nicely machined castings. The soft start and speed control both work smoothly and there isn't a hint of vibration when it runs. If it was blue and had "Makita" or "Bosch" written on the side, you wouldn't bat an eyelid.
It's easy to adjust depth very accurately, and it has a few nice features like LED lights to illuminate the cutting area and good shrouding (with a built-in vacuum port). The only little criticism is that the supplied edge guide feels a bit flimsy (quite at odds with the construction of the rest of the tool), but it should do the job fine.
Next step is to use the thing in anger. If it performs as well as it looks like it will, I'll be very happy.
-
21st May 2019, 08:15 AM #8Intermediate Member
- Join Date
- Oct 2005
- Location
- Sydney
- Posts
- 49
Can't wait!
-
24th May 2019, 10:07 AM #9Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
Used it last night to do a few rebates. Nothing particularly challenging, but it performed flawlessly. Quite impressed really: it's a genuinely good piece of kit.
-
24th May 2019, 10:40 AM #10Intermediate Member
- Join Date
- Oct 2005
- Location
- Sydney
- Posts
- 49
Great! I'll order one tomrorrow.
A big thank you!
-
25th May 2019, 12:07 PM #11Boucher de Bois
- Join Date
- May 2010
- Location
- Wellington, NZ
- Posts
- 551
Hope you like it!
Similar Threads
-
A bit out of left field - floating floorboards in garage.... dance and cars.
By geocacher in forum WOODWORK - GENERALReplies: 14Last Post: 6th February 2017, 03:16 PM -
left field question
By maddog 62 in forum TIMBERReplies: 4Last Post: 5th September 2011, 09:34 PM -
From left field
By specialist in forum METALWORK FORUMReplies: 1Last Post: 3rd December 2010, 10:54 PM -
Here's one straight out of Left-Field!
By Batpig in forum HAND TOOLS - POWEREDReplies: 16Last Post: 29th August 2008, 08:38 AM