Thanks Thanks:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 15 of 15

Thread: Makita 3600BR

  1. #1
    Join Date
    Dec 2007
    Location
    Brisbane
    Age
    53
    Posts
    14

    Default Makita 3600BR

    Hi everyone

    Due to the passing of my grandfather I inherited the above router. He has it mounted in his Triton table. Is this a router designed primarily for this use or is it OK for using as a handheld?

    Secondly my router pieces have a smaller shaft than this machine. Is adaptor which allows me to use them? I haven't sorted through all of his tools but I can't find the spanners or any other accessories to go with it yet and the Makita site doesn't list this machine. I'm am unsure if it is old as the machine is virtually unused and as new.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2004
    Location
    Towradgi
    Posts
    4,835

    Default

    Aldo, the 3600BR is a 1/2" router. You can get a 1/2 to 1/4 collet from various places. I have a manual I can email it to you if required.
    Pat
    Work is a necessary evil to be avoided. Mark Twain

  4. #3
    Join Date
    Dec 2007
    Location
    Avalon Beach, Sydney, 2107
    Posts
    202

    Default

    Hi Aldo,
    I think you'll find the 3600BR was discontinued in 1985.
    1/2" to 1/4" Collet sleeve looks like this.
    http://www.tools-plus.com/makita-763803-0.html
    As Pat said, you can get them anywhere.

    Mike
    .
    www.ColonialPlantationShutters.com.au
    Use your garage or home workshop to make Plantation Shutters as a business

  5. #4
    Join Date
    Dec 2007
    Location
    Brisbane
    Age
    53
    Posts
    14

    Default

    Thanks for your replies. Pat I will get back to you about the manual, thanks. Mike 1985, I guess sales may have continued for a while because it is in as new condition. Thanks for the info on the collets, I will chase them up as well as a dust extraction port for a vacuum. I do mostly MDF.

  6. #5
    Join Date
    Apr 2003
    Location
    Perth Western Australia
    Age
    90
    Posts
    783

    Default Makita 3600br

    Quote Originally Posted by aldo View Post
    Hi everyone

    Due to the passing of my grandfather I inherited the above router. He has it mounted in his Triton table. Is this a router designed primarily for this use or is it OK for using as a handheld?

    Secondly my router pieces have a smaller shaft than this machine. Is adaptor which allows me to use them? I haven't sorted through all of his tools but I can't find the spanners or any other accessories to go with it yet and the Makita site doesn't list this machine. I'm am unsure if it is old as the machine is virtually unused and as new.
    It certainly can be used as a handheld router and it would have come with a collet to reduce the size to 1/4" and also 3/8" along with a side fence attachment and also a trimming guide. More importantly it was supplied with a 16mm template guide and Makita produce other sizes that will fit the router base.

    It does require two spanners to release the cutter which can be a problem when mounted under the table, but it can be done as this was one of my first routers I ever used.

    I conducted a router workshop a few weeks ago and one of the partcipants arrived with the same router.
    Tom
    Learn new Routing skills with the use of the template guides

    Log on to You Tube for a collection of videos 'Routing with Tom O'Donnell'

  7. #6
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    2,810

    Default

    Aldo, I have one of these beasts in near mint condition , with manuals accessories etc. I have attached a copy of the manual cover for you as it shows the parts supplied, which might help you to recognise bits in the workshop. The spanners are 21mm and 27mm, any reasonable open enders those sizes should surfice.

    The template adaptor is 16mm as TT suggested and was common to a variety of Mak Routers of the time. There was a range of other sizes also.

    Quite often people mounting routers in a table will take the acrylic glide pad off the router base to save 5-7mm and maximise bit elevation, after the table mounting arrangements are made. I suggest that you use a clear acrylic Universal base pad if yours is missing. These are available from a variety of sources including CarbaTec and (I think) Timbercon. If you retrofit one, you can use the normal turned brass style template guides.

    Mine came with a 1/2 in carbide bit and a 1/2in to 1/4 in reducer for the collet. The parts list in the manual lists reducers for 6, 8, and 10mm and 1/4in and 3/8in.

    Your unit sounds like it might have been well cared for and if so, it should be a fairly viable machine for some time. The main thing that I have found with mine is that steel plunge tubes can fill with wood dust and spill this if the machiine is stored on its side or inverted. This can affect plunge action. It's easy to resolve by removing the big plastic winder knob and the metal nut beneath and allowing the motor and base to seperate. The dust can then be cleaned out of the plunge guides, tubes and return springs and the unit reassembled.

    The only other liability relative to an equivaletent curent machine is the lack of variable speed govenor system, but for 1/4in shank bits hopefully you aren't running bits over 19mm diameter so the speed should be OK. If you buy bits, look at 1/2in shank ones as they are much more rigid in larger bodied bits as there is 4 times as much steel supporting them.

    Hope this helps, come back if I can help further.

    Mal

  8. #7
    Join Date
    Jun 2008
    Location
    Point Lonsdale
    Posts
    15

    Default

    I got my 3600BR new, in 1989, has been used in the router table and hand held, when I can afford to get the triton the markita will become my hand held unit.Yes, it can be a bit of a pain using two spanners under the table to change bits and agree it's a 1/2 inch router so buy 1/2 inch, 12mm bits for it. They are a good router, probably the best in there day as i know some professional cabinet makers that used them for years. Cheers.

  9. #8
    Join Date
    Jan 2004
    Location
    Melbourne
    Age
    73
    Posts
    195

    Default makita 3600br

    I have also got one - I didn't think I have had it that long - doesn't time fly?
    I have used it under a Triton table as well as hand held. It has a bit of a kick to start with but it has not missed a beat.
    I have used it on jarrah and other assorted hardwoods it still goes well.
    I am pretty sure that all the bits and pieces for the 3612? would fit straight into or onto the 3600. The plate and most things seem to be identical.
    regards
    Smithy

  10. #9
    Join Date
    Dec 2007
    Location
    Brisbane
    Age
    53
    Posts
    14

    Default

    Thanks for the replies.

    Thanks Malb for your pic. I am going back this weekend to pick up his Triton table and I will search for the extras which you have shown in your pic. At the moment all I have is the router. I access the spindle with a couple of open enders so that is not an issue.

    I might see how much the vacuum port costs to buy as I like to get rid of MDF dust.

    Your right GPSmith it certainly could do with a soft start It does have a bit of a kick.

  11. #10
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    2,810

    Default

    Quote Originally Posted by aldo View Post
    Thanks for the replies.
    I might see how much the vacuum port costs to buy as I like to get rid of MDF dust.
    Your right GPSmith it certainly could do with a soft start It does have a bit of a kick.
    Aldo, I am not aware of a specifc dust extraction port for this router for handheld use, but if it is used with a table and fence, its not hard to get one working through the fence gap.

    They do have a nice kick to them, but then routers are about the only thing I can think of where you can directly hold a high speed direct drive 2 HP motor in your hands on the axis of rotation and start it, so it is a rather novel experience till you have done it a lot.

  12. #11
    Join Date
    Jan 2005
    Location
    Melbourne
    Posts
    27

    Default

    Mal
    Do you have a full scanned copy of the book for the 3600BR? I just bought one second hand and would like to work out if I can buy or reconstitute the threaded stop pole. PM me if its possible to email it.
    Thanks,
    Peter

  13. #12
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    2,810

    Default

    F_Peter,

    I am assuming that you are refering to the depth stop plunger that fits to the motor housing. This is a 80mm long (threaded) plus 20mm (knurled) threaded 10mm x 1.5mm pitch (Metric Fine thread).

    Working on scanning the manual for you, have sent PM.

    Mal

  14. #13
    Join Date
    Oct 2007
    Location
    Alexandra Vic
    Age
    69
    Posts
    2,810

    Default

    F_Peter,

    I have downloaded a late edition manual from the US for you. It is a 20 page PDF, nearly 3MB. I tried to upload it to Routerforums.com as they have a reference library of manuals and parts lists (it was the first place I looked) and will take PDF attachments to 4MB. That didn't work because I don't have enough posts to be eligible to attach as yet.

    I also looked here but we have a limit of about 400KB so that won't work.

    I have scanned my earlier copy (covers plus 10 pages) but its not great due to the thin paper (ricepaper style) allowing a huge amount of bleedthrough. It is also 5.5MB which is worse than the 3MB for the later one.

  15. #14
    Join Date
    Apr 2006
    Location
    Germany
    Posts
    526

    Default

    I have 2 x 3600BRs and 2 x 3612BRs (among other routers) and for certain purposes, they are the best routers ever built. Anyone looking for a half inch work horse in a bench would be hard pressed to find a better machine. The lack of variable speed can be solved with an external solution.

    I turn to more modern routers for hand use most of the time because of the variable speed and the soft start but I will say this: once you get past the boot in the beginning, these old Maks run smooth as silk.

    If I had my choice of any router (Festo, Milwalkee, DeWalt), I'd go with the Makita 3612C. I know the others have more bells and whistles but the Maks have been very good to me for more than two decades and that means a lot in my book...
    Is it wrong to be in love with a sawbench?

  16. #15
    Join Date
    May 2017
    Location
    Gilgandra
    Age
    69
    Posts
    8

    Default

    Thanks everyone! I just bought a triton router table which had the same router! All the question I had you’ve answered for me!

Similar Threads

  1. makita router manual 3600br model
    By spearby in forum WOODWORK - GENERAL
    Replies: 6
    Last Post: 8th November 2012, 04:20 PM
  2. Makita 3600BR
    By Shedhand in forum ROUTING FORUM
    Replies: 8
    Last Post: 9th December 2008, 12:48 PM
  3. Makita 3600BR give away - suitable for parts
    By Blackout in forum HAND TOOLS - POWERED
    Replies: 3
    Last Post: 4th June 2008, 09:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •