Needs Pictures: 0
Results 1 to 15 of 24
-
6th June 2014, 01:22 AM #1New Member
- Join Date
- May 2014
- Location
- Sth australia
- Posts
- 2
Power switch for home made router table.
Hey all, wondering if anyone knows where to buy a safety cut off switch for a router table here in Sth aust,thinking of making a table up and think one will be necessary.
-
6th June 2014 01:22 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th June 2014, 08:17 PM #2
Try this
http://www.woodworksupplies.com.au/p...witch-standard
I don't have one, nor any association with pws.
For my router table, I use a power board with individual switches. I simply switch on the router, then use the power board to start and stop.
TravSome days we are the flies; some days we are the windscreen
-
7th June 2014, 10:52 PM #3
Remote control power sockets work well - should be able to find them at Bunnings.
-
9th June 2014, 09:01 PM #4Senior Member
- Join Date
- Feb 2008
- Location
- sydney, au
- Posts
- 192
TRy here:
http://www.timbecon.com.au/products/...ies-451_0.aspx
Or try Hare and Forbes http://www.machineryhouse.com.au/Home
They sell spare parts for all their machines and a safety switch is bound to be available...James,
Sydney, Australia
-
10th June 2014, 10:28 AM #5SENIOR MEMBER
- Join Date
- Dec 2008
- Location
- Hobart
- Posts
- 153
-
23rd December 2016, 10:04 PM #6SENIOR MEMBER
- Join Date
- Apr 2005
- Location
- Warragul
- Age
- 68
- Posts
- 577
-
23rd December 2016, 10:23 PM #7Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
Timbecon sell one
https://www.timbecon.com.au/routing/...old-separately
i have the PWS one and it's been great.
-
23rd December 2016, 10:37 PM #8SENIOR MEMBER
- Join Date
- Apr 2005
- Location
- Warragul
- Age
- 68
- Posts
- 577
Is the Timbecon switch a NVR? Electrician needed?
The PWS switch is highly regarded on this forum but I had another thought about it, do these work with the Tritons? I know that when you change bits the plastic sliding door that covers the switch locks. If I leave the router switch on all the time can I control the power to the router exclusively from an NVR switch, which is what I want?
-
23rd December 2016, 10:49 PM #9Woodworking mechanic
- Join Date
- Jan 2014
- Location
- Sydney Upper North Shore
- Posts
- 4,470
My router is a Triton so the PWS unit is fine. As you said, you have to switch the router off at the router to raise it to lock the shaft when changing bits. If I'm not changing bits, the router switch is on all the time and I turn the router on and off via the PWS switch.
Not sure if the Timbecon one is NVR. Just looked at the price, probably not.
-
24th December 2016, 07:46 AM #10SENIOR MEMBER
- Join Date
- Apr 2005
- Location
- Warragul
- Age
- 68
- Posts
- 577
I was hoping not to hear that. I haven't tested this and I'm away from home but if the router switch is left on and obviously not plugged in, what happens when you raise it to lock the shaft to change bits? Will the spindle lock? Will the sliding door still lock/break? Using the Kreg plate the router is aligned so that the pull ring and twist handle and the hole for raising bits is at the front for easier access but that makes the power switch at the back at little less accessible. Consequently I was hoping to have this switch permanently on, as a set and forget situation, controlling power by only a PWS type unit. Is this not possible on a Triton?
-
24th December 2016, 08:05 AM #11
With Triton Routers to change bits the plastic slide window HAS to be CLOSED so that the spindle lock can be accessed. There is no way to avoid this method, apart from removing the slide window altogether.
Just do it!
Kind regards Rod
-
24th December 2016, 09:13 AM #12Senior Member
- Join Date
- Jan 2008
- Location
- Vevey, Switzerland
- Posts
- 407
It's possible to use an extension collet:Xtreme Xtension Router Extension Collett (Includes T Handled Ball Wrench) I had one and it worked quite well, but I bought it when the dollar was a lot stronger!
Cheers, Glen
-
24th December 2016, 09:23 AM #13
But don't you still have a separate spindle lock plunger?
The plastic switch lockout only stops the last 1" or so of travel which also operates the spindle lock for you. So if you keep the router switch permanently on, you can't raise it fully (harder to get the spanner on) and you now have to hold the lock plunger in yourself. Isn't the triton switch cover just a simple mechanical auto shaft lockout device?
-
24th December 2016, 10:42 AM #14SENIOR MEMBER
- Join Date
- Apr 2005
- Location
- Warragul
- Age
- 68
- Posts
- 577
I guess it is a good safety feature and I shouldn't ignore that. Also, the amount of bit changing for me would be minimal. For example, if I was making an embroidery box the only bit I'd use would be a round over. The odd time I might change from a straight bit to a profile bit, so for the sake of safety and minor inconvenience I'll put up with it. I'll buy one of the PWS NVR switches, another safety feature, and I might even plug it into a remote control switch, that way I can turn it off with whatever is closest at the time. I was looking forward to controlling power from outside my cabinet.
-
24th December 2016, 12:32 PM #15
Yes, that is how I've made mine, an NVR switch on the front, but also added auto cutout and no start if dust extraction is not running (vacuum sensor)
I've utilised a couple of rare earth magnets to hold the front under table dust extraction and router housing door closed, having the triton slide safety switch at the back turned out to be as simple as ABC to use and actually is the ideal position for it, don't have to bend over, no contortions needed to reach and control it and of course the extra safety - However one thing to keep in mind with an NVR switch in this case: If you have the router mounted power switch off and you press the NVR switch with AC applied, the NVR magnetic switch will lock on, but of course the router won't start, now there is always the possibility that you may turn the router switch on thinking that it won't run until you press the NVR switch - which in this case is not true.
Now of course you may never do that and I only mention it because even if it's a 1 in 1000 possibility, it's still worth being aware of. There is a way to overcome that but it's likely not worth worrying about.
Similar Threads
-
Router Table Switch - Power Strip?
By michhes in forum GENERAL & SMALL MACHINERYReplies: 13Last Post: 9th December 2013, 11:05 AM -
A home-made power scraper
By jhovel in forum METALWORK FORUMReplies: 23Last Post: 22nd October 2011, 12:20 AM -
Home made loose tenon & mortise jig for router table
By *Kev in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 13Last Post: 15th May 2009, 05:23 PM -
home made router table question
By simmo72 in forum ROUTING FORUMReplies: 5Last Post: 7th February 2007, 10:09 PM -
Another Home Made Router Table
By Krazee in forum ROUTING FORUMReplies: 14Last Post: 21st January 2007, 01:04 PM