Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: What Router to choose ?
-
11th February 2014, 01:40 AM #1New Member
- Join Date
- Feb 2014
- Location
- australia
- Posts
- 4
What Router to choose ?
Im in the market for a new router,
currently I have a Makita 3709 trimer its great, light weight and easy to use so I dont want to kill it with heavier work.
current need is mortising for a table legs, using Hardwood, possible mortise width around 12.7mm(1/2in) to 20mm undicided so far, 80x80 timber
Ideally a 1/2in model that I can get a 1/4in collet for it as well
These are some that have tweeked my interst so far
Bosch POF1200AE syd tools have them for $129 but no stock and only 1/4in
Triton JOF001 online price $269 not sure if I can get it yet,
just came across this one looks good seems to have a good variety of spec,but Im a bit concerned about the fence setup. as I want to use it for some mortise work, the fence looks a bit clumsy. any thoughts ?
AEG 1350e $225 bunnings,
Haitachi M12sa looks good but the price is now creeping up a bit
makita 1/2 in model a bit to pricey
not in the mood for a Ryobi
Its a hard choice but any ideas will help me make up my mind
I like to look of the triton and toughts on the fence?
-
11th February 2014 01:40 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th February 2014, 11:32 AM #2New Member
- Join Date
- Feb 2014
- Location
- australia
- Posts
- 4
choices choices
I prety sure Ive choosen my new toy.
The Triton JOF001 lookslike to winner. why?
features : soft start, variable speed, 1/2in , spindle lock, comes with a 1/2in and 1/4 collet(have to double check the 1/4 have found conflicting info on this ) and the weight 3.9kg
and most of all price VEK tools have them for $269 in sydney and on line
The Mak's and Hitachi were to high in price for similar specs
anyway hope it works out
-
12th February 2014, 02:04 PM #3
Based on research and advice here on the Forums I was looking at the Triton MOF001 and Hitatchi M12VE … was originally looking at the SE version but several peeps recommended to upgrade to the variable speed. In the end I got a good deal on a Triton TRA001 from someone here on the Forums which should be in my hands within a week
-
19th February 2014, 11:14 PM #4New Member
- Join Date
- Feb 2014
- Location
- australia
- Posts
- 4
Done it I got the Triton JOF001 and so far its been great, $269 VEK tools Sydney
Ive been cutting mortise for table legs and it works a treat with the jig i made up.
Its light enoungh to handle by hand yet still has some weight behind it.(3.9kg actually)
the fence and base plate are big and ridgid might cause some issue doing smaller stuff but so far its been alright,
Its still a bit stiff when plunging but im hopping that will clear up over time.
What did it come with ?
Spanner for the collets
1/4 in collet
1/2 in collet
handle for height adjustment (when under a table)
base plate
fence
small peice to attach to the fence to make a circular cut
dosent come with any router bits. at least mine didnt
Similar Threads
-
Wax or Oil -- help me choose
By ian in forum FINISHINGReplies: 8Last Post: 31st July 2011, 09:57 PM -
Hi - but how did you choose?
By craig_k in forum G'day mate - THE WELCOME WAGON -Introduce yourselfReplies: 2Last Post: 2nd November 2010, 05:21 PM -
Which Vac To Choose
By justinmcf in forum FESTOOL FORUMReplies: 8Last Post: 24th March 2010, 09:54 PM -
Which one should I choose?
By Roll Tide in forum BANDSAWSReplies: 7Last Post: 13th August 2007, 11:12 AM