Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Need router to modify windows
-
6th February 2011, 10:33 PM #1Senior Member
- Join Date
- Aug 2009
- Location
- Melbourne Vic
- Posts
- 116
Need router to modify windows
I asked for few bits of timber to add to my windows and I was quoted something like $500 for the job which will only be a temp band aid.
So I am on the quest for a router and table that can cut long very thin grooves 2.5mm and 6mm depth in two metres lengths in thin dressed timber to work on window sash and rail bits,, edge forming, and rebating.
What type of router and brand table should do the above say that I intend to keep this as personal hobby for the next twelve months.
Thank youAustralian Pensioners Forums
Fifties and Over Independent Forums
-
6th February 2011 10:33 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th February 2011, 10:50 PM #2
Far easier, cheaper and stronger to get thin peices of wood and laminate them to create the form you need. That way all you need is glue, clamps and strips of wood. I make picture frames that way, they dont warp like a single piece of wood.
Cutting a slot my preference would be a saw bench, with a router it can go wrong very quickly
-
7th February 2011, 12:15 AM #3Senior Member
- Join Date
- Aug 2009
- Location
- Melbourne Vic
- Posts
- 116
Similar Threads
-
How to Modify Respirator Helmet to Run off Direct DC
By didgemaker in forum WOODWORK - GENERALReplies: 25Last Post: 11th March 2010, 04:53 PM -
Best Way To Modify Quick Change Tool Post
By Retromilling in forum METALWORK FORUMReplies: 32Last Post: 30th April 2009, 06:10 PM -
Will I modify my WC2000
By athertonc17 in forum TRITON / GMCReplies: 3Last Post: 27th March 2007, 10:50 AM