Thanks: 0
Needs Pictures: 0
Results 1 to 4 of 4
Thread: Router table build
-
16th August 2020, 06:45 PM #1GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Sydney
- Posts
- 1,557
Router table build
Here is my new router table in progress from a converted toy box, frame made from 70x45 sized smaller due to bunnings quality, top is. 35mm Formica bench top for the princely sum of $16, IKEA. Edging is unknown hard wood, track from McJings, Sherwood plate from Timbecon, nasty routering job on the recess, Triton (due to chuck coming loose on my last pass). Fence from $10 - 1/4 sheet form ply, bunnings.
the fence will have a pivot pin on left hand side to allow a micro adjuster clamp on the right. Only needing to move 1 part not 2.
Painted white as I had a tin of ceiling paint with Microban, which I need as too much moisture, not enough air flow where I live. The front opening needs a tidy up before I build the internals for the drawers etc.
EC8D55E9-8DDE-4CB0-825B-5370108E0FDB.jpg 2FCEF693-84D0-4DD8-98DC-21A5227271AE.jpg 9D0846F8-0424-45E6-9701-2FC7F8F07B67.jpg
Below shows close up of the loose chuck disaster, I know it’s not going to affect any routering but would’ve been nice to been clean all round. Fixing the router is another story.
AE406416-AA87-4984-B616-6F2D29A89C9A.jpg ADE123A7-59F6-46A5-ADA5-7A58393E8CA4.jpg
-
16th August 2020 06:45 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th August 2020, 08:12 PM #2Senior Member
- Join Date
- Aug 2016
- Location
- Hervey Bay
- Age
- 46
- Posts
- 230
Thanks for sharing, wondering where you got the switch from?
-
16th August 2020, 10:58 PM #3GOLD MEMBER
- Join Date
- Apr 2013
- Location
- Sydney
- Posts
- 1,557
-
19th August 2020, 07:14 PM #4
Looks good so far. Shame about the wobbly edge but you should be able to fill the gap up with some body filler and then trim it back again. A little strategically placed paint and you won't notice (or at least no one else will unless you point it out).
What do you think of the Router plate as I'm considering one myself. Obviously you haven't used it yet to get a true feel.Dallas
Similar Threads
-
New Router Table Build
By Chris Parks in forum ROUTING FORUMReplies: 49Last Post: 15th January 2022, 11:40 PM -
Yet another Router table build.
By MandJ in forum ROUTING FORUMReplies: 263Last Post: 9th April 2019, 10:07 AM -
Router table - Build or buy?
By Dazm in forum ROUTING FORUMReplies: 9Last Post: 12th November 2015, 11:35 AM -
New router table build - no really!
By snowyskiesau in forum ROUTING FORUMReplies: 24Last Post: 14th November 2013, 08:02 AM -
Want to build a table for router and cms
By Guy in forum HAND TOOLS - POWEREDReplies: 3Last Post: 23rd June 2004, 12:31 AM