Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Router table fence setting
-
27th June 2007, 03:32 PM #1Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Router table fence setting
G'day mates
To set the Fence/Bit distance I'm using this simple set-up with caliper (modified).
You can measure the distance with the same set-up using ruler but I prefer the caliper even though it requires some simple calculation.
The caliper shows the distance between the fence and the far end of the bit so, if the bit diameter is 10 mm and the caliper shows 20 mm, I know that the cut will start at 10 mm and will end at 20 mm from the fence.
Maybe it looks like too much work, but, I have to do it only once...and the precision that I get...
It's very easy to modify the caliper...takes some 5 min, some 3 pieces from the scrap box and a few drops of CA...(I have a step-by-step pics and will post separately).
Regards
niki
-
27th June 2007 03:32 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th June 2007, 03:33 PM #2Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
-
27th June 2007, 03:34 PM #3Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
-
28th June 2007, 02:24 AM #4Senior Member
- Join Date
- Mar 2006
- Location
- Perth
- Age
- 57
- Posts
- 338
Terrific work Niki!
I've been considering making a better router fence and this is nice and simple.
Thanks for sharing.Graeme
-
28th June 2007, 10:53 AM #5GOLD MEMBER
- Join Date
- Aug 2005
- Location
- Queensland
- Posts
- 2,947
Nice one again Niki - do you buy those verniers in bulk?
-
29th June 2007, 12:39 AM #6Deceased
- Join Date
- Jan 2006
- Location
- poland
- Age
- 78
- Posts
- 761
Thank you
Bookend
Of course you can bolt (or screw) on top of this fence a high auxiliary fence (if needed) or Split fence.
Bob
No, I did not buy them in bulk but one by one (five of them)
Regards
niki
Similar Threads
-
Router table fence
By Chumley in forum ROUTING FORUMReplies: 11Last Post: 1st April 2007, 09:27 AM -
Router Table help
By Cruzi in forum ROUTING FORUMReplies: 2Last Post: 27th December 2006, 07:40 PM -
Using the ETA300 Extension Table with the RSA300 Router Stand
By princhester in forum TRITON / GMCReplies: 1Last Post: 3rd October 2005, 03:23 AM -
RTA200 Router Table
By Gazza in forum TRITON / GMCReplies: 23Last Post: 29th June 2005, 12:38 PM -
Supersaw/router Table Poser
By bewdynewk in forum ROUTING FORUMReplies: 8Last Post: 25th April 2005, 04:48 AM