Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 2 of 2
  1. 13th February 2020, 03:28 PM #1
    wm460's Avatar
    wm460
    wm460 is offline GOLD MEMBER
    Join Date
    Aug 2008
    Location
    Tennant Creek, Aust
    Age
    61
    Posts
    1,319

    Default Router Table Saw Wing Extension.

    I have a cast iron router table-saw extension wing, that I dont use, as it a PITA to use, always in the way of the T/S.P6210500.jpg

    Sorry about the side way pic.

    I was thinking about making one out of MDF approx 685mm x 600mm
    The cast iron one is only 685mm X 255mm
    My router is a Triton, I have the winder handle kit, a while ago I bought a Incea 7518 router plate.

    How would you affix it to the T/S?, the T/S fence brackets are not very long.

    Ratty 05/2004 -05/07/2010 COOPER 01/08/1998-31/01/2012
    Reply With Quote Reply With Quote
  2. 13th February 2020 03:28 PM # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. 14th February 2020, 08:18 PM #2
    orraloon's Avatar
    orraloon
    orraloon is offline almost a woodworker
    Join Date
    Feb 2007
    Location
    blue mountains
    Posts
    4,887

    Default

    Sorry but I don't see the logic here. If you hang a MDF wing off the table wont it be just as in the way as the cast iron wing.
    As to fixing then use the bolt holes on the edge of the saw table to attach metal brackets. You will likely have to make up something from metal angle. Legs will be required to support outboard end. Oversize the bolt holes in the brackets so you can adjust it level with the saw table. I think you would find things easier with the router fence on the other side and work from the back of the saw. My fence clamps to the saw fence for easy adjustment.
    The laminated wing in the pic actually came with the saw for supporting wide cuts so I just stuck in a router plate. Shows that you will need legs on the end.

    Regards
    John
    Attached Images Attached Images
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Small Table saw as a base for incra fence and router on a extension wing.
    By blackjaffa in forum TABLE SAWS & COMBINATIONS
    Replies: 15
    Last Post: 6th February 2017, 10:19 AM
  2. Cheap 1/2" router for router table wing in TS
    By Wol in forum ROUTING FORUM
    Replies: 5
    Last Post: 2nd July 2015, 09:04 PM
  3. Router Table Extension Wing
    By Jas The Master in forum TABLE SAWS & COMBINATIONS
    Replies: 5
    Last Post: 20th March 2009, 12:18 AM
  4. Router Table Extension Wing for TSC 10HB
    By Geoff Dean in forum HAND TOOLS - POWERED
    Replies: 10
    Last Post: 30th October 2007, 07:45 AM
  5. Table Saw - Router wing
    By ptygmit in forum WOODWORK - GENERAL
    Replies: 0
    Last Post: 18th September 2007, 09:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules