Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
Thread: Router Table Saw Wing Extension.
-
13th February 2020, 03:28 PM #1
Router Table Saw Wing Extension.
I have a cast iron router table-saw extension wing, that I dont use, as it a PITA to use, always in the way of the T/S.P6210500.jpg
Sorry about the side way pic.
I was thinking about making one out of MDF approx 685mm x 600mm
The cast iron one is only 685mm X 255mm
My router is a Triton, I have the winder handle kit, a while ago I bought a Incea 7518 router plate.
How would you affix it to the T/S?, the T/S fence brackets are not very long.
Ratty 05/2004 -05/07/2010 COOPER 01/08/1998-31/01/2012
-
13th February 2020 03:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th February 2020, 08:18 PM #2
Sorry but I don't see the logic here. If you hang a MDF wing off the table wont it be just as in the way as the cast iron wing.
As to fixing then use the bolt holes on the edge of the saw table to attach metal brackets. You will likely have to make up something from metal angle. Legs will be required to support outboard end. Oversize the bolt holes in the brackets so you can adjust it level with the saw table. I think you would find things easier with the router fence on the other side and work from the back of the saw. My fence clamps to the saw fence for easy adjustment.
The laminated wing in the pic actually came with the saw for supporting wide cuts so I just stuck in a router plate. Shows that you will need legs on the end.
Regards
John
Similar Threads
-
Small Table saw as a base for incra fence and router on a extension wing.
By blackjaffa in forum TABLE SAWS & COMBINATIONSReplies: 15Last Post: 6th February 2017, 10:19 AM -
Cheap 1/2" router for router table wing in TS
By Wol in forum ROUTING FORUMReplies: 5Last Post: 2nd July 2015, 09:04 PM -
Router Table Extension Wing
By Jas The Master in forum TABLE SAWS & COMBINATIONSReplies: 5Last Post: 20th March 2009, 12:18 AM -
Router Table Extension Wing for TSC 10HB
By Geoff Dean in forum HAND TOOLS - POWEREDReplies: 10Last Post: 30th October 2007, 07:45 AM -
Table Saw - Router wing
By ptygmit in forum WOODWORK - GENERALReplies: 0Last Post: 18th September 2007, 09:35 PM