Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 2 of 2
-
6th February 2014, 12:28 PM #1GOLD MEMBER
- Join Date
- Jan 2009
- Location
- Australia
- Posts
- 1,224
Need a sparkie to bypass Triton router speed controller
I need a sparkie to either explain how to or do it for me, to bypass the speed controller.
Newcastle/Medowie NSW.
I had a sparkie check the router after it failed. No smoke, just a few speed surges then didn't go no more
He said (confirmed my suspicion) that it was the controller and the armature and windings are good, as is switch. I asked him to bypass the controller but he wouldn't do it. "I couldn't do that as it is not safe, as it is a big router and it'll be too much to handle!" Hmmm alright, but when I asked what would be the difference if the controller was OK and I started the router at max speed????
Anyway long story short, I have a router that is electrically OK, but for the controller.
I've had a look through here but the only info here was to swap the brown wires at the switch, but I tried that and it didn't work.
So does anyone know a good sparkie in the Medowie/Newcastle that could bypass the controller for me?
I'm over in the UK in Jul, so maybe worth waiting and pick one up there? 40GBP versus an electrician fee???
-
6th February 2014 12:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th February 2014, 06:36 PM #2
Haven't been down the single speed Triton road, but if you bypass it, you loose the speed control and the soft start as they both come out of the same module. Might be OK for a table and small (under 25mm) bits, but could be a nightmare with bigger bits that need slower speed to control tip speed, or in hand held applications where the start kick would be substantial.
I have a TRA and a 30 YO 1500W Makita fixed speed, and the TRA with soft start is definitely much less surprising on start up than the old Mak. Personally not too keen on trying to grip a 2HP motor and start it.
For my money an exact replacement via GB either now or when you go over and can collect would be the better option, you should be able to swap new for old without issues, provided that the unit has been restored to standard configuration after you tried swapping wires.I used to be an engineer, I'm not an engineer any more, but on the really good days I can remember when I was.
Similar Threads
-
Will this speed controller work with my router ?
By fletch123 in forum ROUTING FORUMReplies: 15Last Post: 31st May 2012, 08:17 PM -
cheap router speed controller?
By 2zenmonks in forum ROUTING FORUMReplies: 4Last Post: 12th April 2012, 10:33 PM -
Speed controller
By rev in forum WOODTURNING - GENERALReplies: 17Last Post: 14th March 2010, 02:52 PM -
Speed Controller
By dj_pnevans in forum WOODTURNING - PEN TURNINGReplies: 12Last Post: 13th November 2008, 08:43 AM -
router add-on speed controller
By Kevan in forum ROUTING FORUMReplies: 6Last Post: 26th September 2000, 10:01 PM