Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
12th May 2020, 10:10 PM #1
spindle bushings to fit a router lift.
Hi guys. I have just purchased the ready2rout router table lift and fence combo from timbecon for an absolute bargain. I have decided to use a 3kw water cooled spindle in the lift. However the lift requires a diamter of 106.7mm and the spindle i was looking to buy was 100mm. I have read the forums and discovered that dalejw used thin strips of aluminium to pack out his router 1.8mm. I was wondering if i used 0.5mm aluminum and stacked them if that would work or if there is an alternative product to buy that helps to pack out the gap of 6.7mm. im looking to do it for as cheap as possible but i want it to be safe and secure. Thank you for you help. I have attached the spindle i was looking to get. cheers
220V 3.0 KW Water Cooled Spindle Motor ER20 & 4kw VFD Variable Frequency Driver & 100mm Spindle Clamp Bracket & 75w water pump|spindle motor er20|water cooled spindle motorspindle motor - AliExpress
-
12th May 2020 10:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
Router Table, Spindle Moulder, CNC Spindle or Round Body Router?
By DomAU in forum ROUTING FORUMReplies: 11Last Post: 3rd July 2019, 06:23 PM -
A Tlting Router Spindle Lift
By Chris Parks in forum ROUTING FORUMReplies: 0Last Post: 3rd August 2018, 11:59 PM -
Spindle Lift
By Chris Parks in forum ROUTING FORUMReplies: 15Last Post: 22nd March 2017, 03:48 PM -
Exacta router lift and Rout-R-lift
By zelk in forum ROUTING FORUMReplies: 8Last Post: 14th November 2007, 11:27 PM