Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Spiral upcut bit prices
-
7th November 2004, 06:36 AM #1
Spiral upcut bit prices
Now that some new catalogues have arrived, it is interesting to compare prices for solid carbide spiral upcut bits from different suppliers. I should note that my most recent CMT catalogue is for 2000, but prices are unlikely to have fallen since then.
MIK CMT LEE VALLEY
1/4" $101 $41 US$17.25
5/16" $231 $67 US$28.95 (plus US$3.25 for bushing adapter)
3/8" $231 $109 US$29.75 (plus US$3.25 for bushing adapter)
1/2" $254 $109 US$47.50
I can only say that local suppliers must be supreme optimists if they expect customers to pay around four times as much for the privilege of buying locally.
Rocker
-
7th November 2004 06:36 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
7th November 2004, 08:43 PM #2
I feel better now.
Awaiting a couple of bits I ordered from LV the other day, I now rest assured I made a prudent fiscal decision.
Plus delivery time from Canada is heaps quicker than western Sydney. :eek:Boring signature time again!
-
8th November 2004, 09:03 AM #3
Has anyone had any experience with the McJing spiral bits?
-
8th November 2004, 11:51 AM #4
Mat,
Just bought a 1/2" one from McJing for $55, and IMO it is a good bit. My experience in routing, however, is limited.
It left a very clean finish on Ringed Myall.
DanIs there anything easier done than said?- Stacky. The bottom pub, Cobram.
-
8th November 2004, 11:57 AM #5
P.S. The CMT is $119 for the 12.7D X 50.8 L (cutter). As of the 2004 cattledog.
DanIs there anything easier done than said?- Stacky. The bottom pub, Cobram.