Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
30th July 2023, 10:21 PM #1Member
- Join Date
- Feb 2023
- Location
- Finger Lakes Area, Central New York State, USA
- Age
- 69
- Posts
- 50
Surfacing a bowl ring with a palm router
Simple piece of 1/4 in plexiglass with mounted palm router .
The work is a segmented ring for a large bowl . Just a little too big for the cole jaws on my lathe.
The blocks are double sided tape attached to the plexi and can be changed for different work pieces.
First side is flattened by simply sledding the router around the piece then the ring is flipped and second side finished parallel to the first.
Both sides flat and parallel. The clamped assembly is the ring glue-up to the balance of the bowl.
calabrese55
IMG_2023-07-26-12-03-30-069.jpgIMG_2023-07-26-12-03-38-387.jpgIMG_2023-07-26-12-03-58-488.jpgIMG_2023-07-26-15-22-27-435.jpg
-
30th July 2023 10:21 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
Which Planing/Surfacing router bit?
By MattB2085 in forum WOODWORK - GENERALReplies: 11Last Post: 19th July 2019, 03:49 PM -
Black palm bowl.
By powderpost in forum WOODTURNING - GENERALReplies: 16Last Post: 3rd September 2013, 09:14 PM -
Slab surfacing router jig
By Woody1 in forum ROUTER JIGSReplies: 6Last Post: 20th March 2012, 09:48 AM -
Bosch Palm router for router table?
By bbdog in forum ROUTING FORUMReplies: 1Last Post: 11th May 2009, 11:42 AM -
Burnt Ring Bowl
By joe greiner in forum WOODTURNING - GENERALReplies: 5Last Post: 28th May 2007, 02:55 PM