Working on some oak table legs using a bearing pattern bit and no fence on the table.
I was getting a bunch of router dust and shavings all over the place had to keep cleaning it up.
Then a light went off in my head and it illuminated what you see below.
Simply enough it is my beat up floor sweep I use with my dust collector..
I simply taped it to the router table stuck a 4 in hose on it and most (not all) of the router waste was captured.
Best part of all if you don't have one you can get one for under 20.00 bucks US .
Typical example https://www.amazon.com/POWERTEC-701...t+collector+floor+sweep&qid=1671827368&sr=8-5
calabrese55

router dust collecter.jpg